- Postcode district
- CW1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Nantwich, Sandbach, Middlewich
- Building rules
- England
What aluminium sliding doors offer homes in Crewe
A few practical points decide whether aluminium sliding doors suit a particular room and opening:
Whether you live in Crewe or elsewhere in Cheshire, a lawn or patio sitting just below floor level can still take a low threshold, provided an outside drainage channel or a fall away from the door is planned.
For a south- or west-facing garden in Crewe, solar-control glass in the sliding panels can keep a glazed room more comfortable on summer afternoons.
- Panels run on adjustable tandem rollers along a hard-wearing track, so even a heavy double or triple glazed panel can be opened smoothly with one hand.
- Multi-point hook locks grip the frame at several points along the closing edge, while anti-lift blocks stop a shut panel being raised off its track from outside.
- A polyamide thermal break inside every profile separates the cold outer metal from the warm inner face, cutting heat loss and reducing the risk of condensation forming on the frame.
Daylight in Crewe and what it means for your glass
Because Crewe sees long summer days (about 16 h 57 min) and short winter ones (about 7 h 33 min), the elevation your door faces makes a real difference. With the midday sun at about 13° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Guide prices for aluminium sliding doors in Crewe
Guide prices are the same across Cheshire: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £3,695–£4,495 |
| 2.1 m | 2 panels | £3,995–£4,895 |
| 4.8 m | 4 panels | £6,995–£8,495 |
See every size on the aluminium sliding doors page or try the guide price tool.
From survey to fitted door in Crewe
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel straight swap; 1–2 days for larger doors for a door like this.
Do you need approval in Crewe?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for aluminium sliding doors in Crewe
- Glass. Double or triple glazed units in toughened or laminated safety glass, with solar-control or self-cleaning coatings.
- Panel configuration. Two, three or four panels, with the sliding panel on the left, right or both sides to suit how you use the room.
- Handles and locks. Slim pull handles or lever handles in matching or contrasting finishes, with an enhanced security locking pack available.
Questions about aluminium sliding doors in Crewe
Do I need building approval for aluminium sliding doors in Crewe?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How wide can an aluminium sliding door be?
An aluminium sliding door in our range can span from about 1.5 m to 6 m, split into two to four panels. Each panel is usually up to about 2.5–3 m wide depending on the system and the weight of the glass. Wider openings take more panels, and beyond about 6 m a multi-track or lift and slide system is usually the more practical choice.
Do aluminium sliding doors need Building Regulations approval?
In England, replacement sliding doors are controlled fittings, so the work is either carried out by an installer registered with a competent person scheme, who self-certifies and notifies, or notified to Building Control. The glass must be safety glazing to BS EN 12600. Forming or widening an opening is structural work needing its own application and calculations. Wales, Scotland and Northern Ireland have their own rules.
Should I choose aluminium sliding doors or bifolds?
Choose aluminium sliding doors if you want the most glass and fewest frames when the door is closed, and bifolds if you want almost the whole width open in summer. A slider keeps wide panels with slim meeting stiles but only opens part of the width; a bifold folds away but shows a frame every metre or so. Our sliding doors vs bifold doors guide compares them in detail.