- Postcode district
- BN25
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Newhaven, Peacehaven, Eastbourne
- Building rules
- England
Aluminium sliding doors in Seaford: what to know
These are the points a surveyor will go through with you when you choose aluminium sliding doors for a home in Seaford:
Where a Seaford property already has aluminium windows, matching the door colour and frame profile keeps the back of the house looking consistent.
If your Seaford home has a rear extension or kitchen-diner, aluminium sliding doors let you place a table close to the glass, because no panel swings into the room.
- Because the panels slide rather than swing, nothing opens into the room or across the patio, leaving space for a dining table, sofa or planters right up to the glass.
- Polyester powder coating is baked onto the aluminium in the factory, giving a hard, even colour that resists fading and chalking and does not need repainting in normal use.
- Multi-point hook locks grip the frame at several points along the closing edge, while anti-lift blocks stop a shut panel being raised off its track from outside.
Light and sun in Seaford
The midday sun over Seaford ranges from about 16° at the winter solstice to about 63° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Guide prices for aluminium sliding doors in Seaford
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £3,995–£4,895 |
| 2.4 m | 2 panels | £4,295–£5,295 |
| 3.0 m | 2 panels | £4,995–£6,095 |
See every size on the aluminium sliding doors page or try the guide price tool.
Timescales for aluminium sliding doors in Seaford
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel straight swap; 1–2 days for larger doors for a door like this.
Do you need approval in Seaford?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Glass. Double or triple glazed units in toughened or laminated safety glass, with solar-control or self-cleaning coatings.
- Panel configuration. Two, three or four panels, with the sliding panel on the left, right or both sides to suit how you use the room.
- Threshold. A standard or low threshold, or a flush finish with a drainage channel outside where floor levels allow.
Questions about aluminium sliding doors in Seaford
Can you match other doors and windows in my Seaford home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Do aluminium sliding doors need Building Regulations approval?
In England, replacement sliding doors are controlled fittings, so the work is either carried out by an installer registered with a competent person scheme, who self-certifies and notifies, or notified to Building Control. The glass must be safety glazing to BS EN 12600. Forming or widening an opening is structural work needing its own application and calculations. Wales, Scotland and Northern Ireland have their own rules.
How wide can an aluminium sliding door be?
An aluminium sliding door in our range can span from about 1.5 m to 6 m, split into two to four panels. Each panel is usually up to about 2.5–3 m wide depending on the system and the weight of the glass. Wider openings take more panels, and beyond about 6 m a multi-track or lift and slide system is usually the more practical choice.
How long do aluminium sliding doors take to arrive?
Aluminium sliding doors typically take 4–6 weeks to make after you sign off the surveyed specification, because each door is built to measure and powder coated to order. Fitting a straight swap of a two-panel door typically takes 1 day, and larger doors 1–2 days. These are typical times rather than promises, and we confirm a date once the order is placed.