- Postcode district
- CM1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Billericay, Witham, Maldon
- Building rules
- England
Aluminium sliding doors in Chelmsford: what to know
Before you settle on a door type, it helps to know what aluminium sliding doors do well and what to check before you order.
If your Chelmsford home has a rear extension or kitchen-diner, aluminium sliding doors let you place a table close to the glass, because no panel swings into the room.
Before aluminium sliding doors are ordered for a Chelmsford home, the survey should check the opening width, floor levels and existing lintel, so the quote reflects the real job.
- Aluminium is stiff enough to carry wide panels without bowing, which keeps the number of vertical frames low even across openings of four, five or six metres.
- Because the panels slide rather than swing, nothing opens into the room or across the patio, leaving space for a dining table, sofa or planters right up to the glass.
- Multi-point hook locks grip the frame at several points along the closing edge, while anti-lift blocks stop a shut panel being raised off its track from outside.
Daylight in Chelmsford and what it means for your glass
Daylight in Chelmsford runs from about 7 h 47 min in December to 16 h 41 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Aluminium sliding doors prices in Chelmsford
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Chelmsford home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 1.8 m | 2 panels | £3,695–£4,495 |
| 3.6 m | 3 panels | £5,595–£6,895 |
See every size on the aluminium sliding doors page or try the guide price tool.
From survey to fitted door in Chelmsford
We plan the job around your home in Chelmsford: survey first, then a written quote, then manufacture (typically 4–6 weeks from survey sign-off). The fitting itself usually takes 1 day for a two-panel straight swap; 1–2 days for larger doors. If you are in Billericay or Witham, the same process and prices apply.
Rules for aluminium sliding doors in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Specification choices for aluminium sliding doors in Chelmsford
- Glass. Double or triple glazed units in toughened or laminated safety glass, with solar-control or self-cleaning coatings.
- Handles and locks. Slim pull handles or lever handles in matching or contrasting finishes, with an enhanced security locking pack available.
- Threshold. A standard or low threshold, or a flush finish with a drainage channel outside where floor levels allow.
Questions about aluminium sliding doors in Chelmsford
Do you fit aluminium sliding doors in Chelmsford?
Yes. We survey and fit aluminium sliding doors in Chelmsford and across Essex, including nearby Billericay and Witham. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Do aluminium sliding doors need Building Regulations approval?
In England, replacement sliding doors are controlled fittings, so the work is either carried out by an installer registered with a competent person scheme, who self-certifies and notifies, or notified to Building Control. The glass must be safety glazing to BS EN 12600. Forming or widening an opening is structural work needing its own application and calculations. Wales, Scotland and Northern Ireland have their own rules.
Should I choose aluminium sliding doors or bifolds?
Choose aluminium sliding doors if you want the most glass and fewest frames when the door is closed, and bifolds if you want almost the whole width open in summer. A slider keeps wide panels with slim meeting stiles but only opens part of the width; a bifold folds away but shows a frame every metre or so. Our sliding doors vs bifold doors guide compares them in detail.
How wide can an aluminium sliding door be?
An aluminium sliding door in our range can span from about 1.5 m to 6 m, split into two to four panels. Each panel is usually up to about 2.5–3 m wide depending on the system and the weight of the glass. Wider openings take more panels, and beyond about 6 m a multi-track or lift and slide system is usually the more practical choice.

