- Postcode district
- SW6
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Putney, Wandsworth, Battersea
- Building rules
- England
Is an aluminium sliding door a good fit for your home in Fulham?
A few practical points decide whether aluminium sliding doors suit a particular room and opening:
Before aluminium sliding doors are ordered for a Fulham home, the survey should check the opening width, floor levels and existing lintel, so the quote reflects the real job.
For a south- or west-facing garden in Fulham, solar-control glass in the sliding panels can keep a glazed room more comfortable on summer afternoons.
- Brush and gasket weather seals along every meeting edge, together with drainage slots in the outer track, carry rainwater away instead of letting it collect against the panels.
- Multi-point hook locks grip the frame at several points along the closing edge, while anti-lift blocks stop a shut panel being raised off its track from outside.
- Polyester powder coating is baked onto the aluminium in the factory, giving a hard, even colour that resists fading and chalking and does not need repainting in normal use.
Planning glass for the light in Fulham
Daylight in Fulham runs from about 7 h 50 min in December to 16 h 38 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do aluminium sliding doors cost in Fulham?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Fulham home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £4,295–£5,295 |
| 4.0 m | 3 panels | £6,095–£7,395 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the aluminium sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Fulham
Here is the usual sequence in Fulham: guide price, free survey, written quote, then manufacture (typically 4–6 weeks from survey sign-off). Fitting typically takes 1 day for a two-panel straight swap; 1–2 days for larger doors. Nearby, we also survey in Putney, Wandsworth and Battersea.
Do you need approval in Fulham?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Finishes and extras for aluminium sliding doors
- Dual colour. A different colour inside and outside, so the exterior can match your windows while the interior suits the room.
- Threshold. A standard or low threshold, or a flush finish with a drainage channel outside where floor levels allow.
- Handles and locks. Slim pull handles or lever handles in matching or contrasting finishes, with an enhanced security locking pack available.
Questions about aluminium sliding doors in Fulham
How soon can you survey in Fulham?
Surveys in the SW6 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks from survey sign-off.
How much do aluminium sliding doors cost?
Aluminium sliding doors start from a guide price of £3,295 for a 1.5 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £4,295–£5,295, and a 4.8 m four-panel door is around £6,995. Glass, colour and threshold choices move the price within the range, and the final figure is fixed in a written quote after survey.
Do aluminium sliding doors need Building Regulations approval?
In England, replacement sliding doors are controlled fittings, so the work is either carried out by an installer registered with a competent person scheme, who self-certifies and notifies, or notified to Building Control. The glass must be safety glazing to BS EN 12600. Forming or widening an opening is structural work needing its own application and calculations. Wales, Scotland and Northern Ireland have their own rules.
Are aluminium sliding doors warm enough for a UK home?
Thermally broken aluminium sliding doors are warm enough for most homes, with typical whole-door U-values around 1.2–1.6 W/m²K double glazed and 0.8–1.1 W/m²K triple glazed, depending on the system. In England, a new or replacement door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better, so the glass is specified to meet that. Wales, Scotland and Northern Ireland have their own rules.