- Postcode district
- UB1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Hayes, Ealing, Hounslow
- Building rules
- England
What aluminium sliding doors offer homes in Southall
These are the points a surveyor will go through with you when you choose aluminium sliding doors for a home in Southall:
Before aluminium sliding doors are ordered for a Southall home, the survey should check the opening width, floor levels and existing lintel, so the quote reflects the real job.
If your Southall home has a rear extension or kitchen-diner, aluminium sliding doors let you place a table close to the glass, because no panel swings into the room.
- Multi-point hook locks grip the frame at several points along the closing edge, while anti-lift blocks stop a shut panel being raised off its track from outside.
- Aluminium is stiff enough to carry wide panels without bowing, which keeps the number of vertical frames low even across openings of four, five or six metres.
- Polyester powder coating is baked onto the aluminium in the factory, giving a hard, even colour that resists fading and chalking and does not need repainting in normal use.
Light and sun in Southall
The midday sun over Southall ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
What should you budget for aluminium sliding doors in Southall?
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £3,695–£4,495 |
| 2.1 m | 2 panels | £3,995–£4,895 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the aluminium sliding doors page or try the guide price tool.
How fitting works in Southall
Here is the usual sequence in Southall: guide price, free survey, written quote, then manufacture (typically 4–6 weeks from survey sign-off). Fitting typically takes 1 day for a two-panel straight swap; 1–2 days for larger doors. Nearby, we also survey in Hayes, Ealing and Hounslow.
Rules for aluminium sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Options to consider for your aluminium sliding door
- Glass. Double or triple glazed units in toughened or laminated safety glass, with solar-control or self-cleaning coatings.
- Colours. Standard shades such as anthracite grey, black and white, or a special RAL colour for an extra charge.
- Threshold. A standard or low threshold, or a flush finish with a drainage channel outside where floor levels allow.
Questions about aluminium sliding doors in Southall
Do you fit aluminium sliding doors in Southall?
Yes. We survey and fit aluminium sliding doors in Southall and across Greater London, including nearby Hayes and Ealing. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Should I choose aluminium sliding doors or bifolds?
Choose aluminium sliding doors if you want the most glass and fewest frames when the door is closed, and bifolds if you want almost the whole width open in summer. A slider keeps wide panels with slim meeting stiles but only opens part of the width; a bifold folds away but shows a frame every metre or so. Our sliding doors vs bifold doors guide compares them in detail.
How do you look after aluminium sliding doors?
Aluminium sliding doors need little care: wash the frames with mild soapy water a few times a year, vacuum grit out of the bottom track and keep the drainage slots clear. A light silicone spray on the locking points once a year keeps them smooth, and rollers can be adjusted if a panel starts to drag. Manufacturer guarantees on frames, hardware and sealed units are passed to you, and our workmanship guarantee is set out in writing in your quote.
Do aluminium sliding doors need Building Regulations approval?
In England, replacement sliding doors are controlled fittings, so the work is either carried out by an installer registered with a competent person scheme, who self-certifies and notifies, or notified to Building Control. The glass must be safety glazing to BS EN 12600. Forming or widening an opening is structural work needing its own application and calculations. Wales, Scotland and Northern Ireland have their own rules.