- Postcode district
- SW17
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Balham, Streatham, Mitcham
- Building rules
- England
Are aluminium sliding doors right for your Tooting home?
Here is what to weigh up if you are considering aluminium sliding doors for a home in Tooting:
Thinking about a dark frame for a house in Tooting? Anthracite grey and black powder coats show off slim aluminium sightlines, and dual colour keeps the inside lighter if you prefer.
Where a Tooting property already has aluminium windows, matching the door colour and frame profile keeps the back of the house looking consistent.
- Panels run on adjustable tandem rollers along a hard-wearing track, so even a heavy double or triple glazed panel can be opened smoothly with one hand.
- Because the panels slide rather than swing, nothing opens into the room or across the patio, leaving space for a dining table, sofa or planters right up to the glass.
- Narrow aluminium frames and meeting stiles put more of the opening into glass, so you see more garden and less frame than with a uPVC door of the same size.
Light and sun in Tooting
Daylight in Tooting runs from about 7 h 50 min in December to 16 h 37 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
What should you budget for aluminium sliding doors in Tooting?
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £3,695–£4,495 |
| 3.6 m | 3 panels | £5,595–£6,895 |
| 4.8 m | 4 panels | £6,995–£8,495 |
See every size on the aluminium sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Tooting
We plan the job around your home in Tooting: survey first, then a written quote, then manufacture (typically 4–6 weeks from survey sign-off). The fitting itself usually takes 1 day for a two-panel straight swap; 1–2 days for larger doors. If you are in Balham or Streatham, the same process and prices apply.
Rules for aluminium sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for aluminium sliding doors
- Handles and locks. Slim pull handles or lever handles in matching or contrasting finishes, with an enhanced security locking pack available.
- Threshold. A standard or low threshold, or a flush finish with a drainage channel outside where floor levels allow.
- Glass. Double or triple glazed units in toughened or laminated safety glass, with solar-control or self-cleaning coatings.
Questions about aluminium sliding doors in Tooting
How soon can you survey in Tooting?
Surveys in the SW17 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks from survey sign-off.
How do you look after aluminium sliding doors?
Aluminium sliding doors need little care: wash the frames with mild soapy water a few times a year, vacuum grit out of the bottom track and keep the drainage slots clear. A light silicone spray on the locking points once a year keeps them smooth, and rollers can be adjusted if a panel starts to drag. Manufacturer guarantees on frames, hardware and sealed units are passed to you, and our workmanship guarantee is set out in writing in your quote.
Do aluminium sliding doors need Building Regulations approval?
In England, replacement sliding doors are controlled fittings, so the work is either carried out by an installer registered with a competent person scheme, who self-certifies and notifies, or notified to Building Control. The glass must be safety glazing to BS EN 12600. Forming or widening an opening is structural work needing its own application and calculations. Wales, Scotland and Northern Ireland have their own rules.
Should I choose aluminium sliding doors or bifolds?
Choose aluminium sliding doors if you want the most glass and fewest frames when the door is closed, and bifolds if you want almost the whole width open in summer. A slider keeps wide panels with slim meeting stiles but only opens part of the width; a bifold folds away but shows a frame every metre or so. Our sliding doors vs bifold doors guide compares them in detail.

