- Postcode district
- BH24
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Ferndown, Fordingbridge, Christchurch
- Building rules
- England
Are aluminium sliding doors right for your Ringwood home?
These are the points a surveyor will go through with you when you choose aluminium sliding doors for a home in Ringwood:
If your Ringwood home has a rear extension or kitchen-diner, aluminium sliding doors let you place a table close to the glass, because no panel swings into the room.
Where a Ringwood property already has aluminium windows, matching the door colour and frame profile keeps the back of the house looking consistent.
- Multi-point hook locks grip the frame at several points along the closing edge, while anti-lift blocks stop a shut panel being raised off its track from outside.
- Polyester powder coating is baked onto the aluminium in the factory, giving a hard, even colour that resists fading and chalking and does not need repainting in normal use.
- A polyamide thermal break inside every profile separates the cold outer metal from the warm inner face, cutting heat loss and reducing the risk of condensation forming on the frame.
Daylight in Ringwood and what it means for your glass
Daylight in Ringwood runs from about 7 h 56 min in December to 16 h 31 min in June, with the noon sun at roughly 16° and 63° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Aluminium sliding doors prices in Ringwood
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Ringwood home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £4,995–£6,095 |
| 4.8 m | 4 panels | £6,995–£8,495 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the aluminium sliding doors page or try the guide price tool.
How fitting works in Ringwood
Here is the usual sequence in Ringwood: guide price, free survey, written quote, then manufacture (typically 4–6 weeks from survey sign-off). Fitting typically takes 1 day for a two-panel straight swap; 1–2 days for larger doors. Nearby, we also survey in Ferndown, Fordingbridge and Christchurch.
Rules for aluminium sliding doors in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Which options matter for aluminium sliding doors?
- Colours. Standard shades such as anthracite grey, black and white, or a special RAL colour for an extra charge.
- Panel configuration. Two, three or four panels, with the sliding panel on the left, right or both sides to suit how you use the room.
- Glass. Double or triple glazed units in toughened or laminated safety glass, with solar-control or self-cleaning coatings.
Questions about aluminium sliding doors in Ringwood
How soon can you survey in Ringwood?
Surveys in the BH24 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks from survey sign-off.
How do you look after aluminium sliding doors?
Aluminium sliding doors need little care: wash the frames with mild soapy water a few times a year, vacuum grit out of the bottom track and keep the drainage slots clear. A light silicone spray on the locking points once a year keeps them smooth, and rollers can be adjusted if a panel starts to drag. Manufacturer guarantees on frames, hardware and sealed units are passed to you, and our workmanship guarantee is set out in writing in your quote.
How wide can an aluminium sliding door be?
An aluminium sliding door in our range can span from about 1.5 m to 6 m, split into two to four panels. Each panel is usually up to about 2.5–3 m wide depending on the system and the weight of the glass. Wider openings take more panels, and beyond about 6 m a multi-track or lift and slide system is usually the more practical choice.
Should I choose aluminium sliding doors or bifolds?
Choose aluminium sliding doors if you want the most glass and fewest frames when the door is closed, and bifolds if you want almost the whole width open in summer. A slider keeps wide panels with slim meeting stiles but only opens part of the width; a bifold folds away but shows a frame every metre or so. Our sliding doors vs bifold doors guide compares them in detail.