- Postcode district
- LE13
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Oakham, Bingham, Loughborough
- Building rules
- England
Is an aluminium sliding door a good fit for your home in Melton Mowbray?
These are the points a surveyor will go through with you when you choose aluminium sliding doors for a home in Melton Mowbray:
Where a Melton Mowbray property already has aluminium windows, matching the door colour and frame profile keeps the back of the house looking consistent.
If your Melton Mowbray home has a rear extension or kitchen-diner, aluminium sliding doors let you place a table close to the glass, because no panel swings into the room.
- Polyester powder coating is baked onto the aluminium in the factory, giving a hard, even colour that resists fading and chalking and does not need repainting in normal use.
- Brush and gasket weather seals along every meeting edge, together with drainage slots in the outer track, carry rainwater away instead of letting it collect against the panels.
- Multi-point hook locks grip the frame at several points along the closing edge, while anti-lift blocks stop a shut panel being raised off its track from outside.
Light and sun in Melton Mowbray
Daylight in Melton Mowbray runs from about 7 h 36 min in December to 16 h 53 min in June, with the noon sun at roughly 14° and 61° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
What should you budget for aluminium sliding doors in Melton Mowbray?
Guide prices are the same across Leicestershire: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 3.6 m | 3 panels | £5,595–£6,895 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the aluminium sliding doors page or try the guide price tool.
From survey to fitted door in Melton Mowbray
A surveyor visits your Melton Mowbray home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 4–6 weeks from survey sign-off — and fitting usually takes 1 day for a two-panel straight swap; 1–2 days for larger doors. We also cover Oakham (15 km south-east) and Bingham (21 km north).
Do you need approval in Melton Mowbray?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for aluminium sliding doors
- Dual colour. A different colour inside and outside, so the exterior can match your windows while the interior suits the room.
- Colours. Standard shades such as anthracite grey, black and white, or a special RAL colour for an extra charge.
- Glass. Double or triple glazed units in toughened or laminated safety glass, with solar-control or self-cleaning coatings.
Questions about aluminium sliding doors in Melton Mowbray
Do I need building approval for aluminium sliding doors in Melton Mowbray?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Are aluminium sliding doors warm enough for a UK home?
Thermally broken aluminium sliding doors are warm enough for most homes, with typical whole-door U-values around 1.2–1.6 W/m²K double glazed and 0.8–1.1 W/m²K triple glazed, depending on the system. In England, a new or replacement door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better, so the glass is specified to meet that. Wales, Scotland and Northern Ireland have their own rules.
How wide can an aluminium sliding door be?
An aluminium sliding door in our range can span from about 1.5 m to 6 m, split into two to four panels. Each panel is usually up to about 2.5–3 m wide depending on the system and the weight of the glass. Wider openings take more panels, and beyond about 6 m a multi-track or lift and slide system is usually the more practical choice.
Should I choose aluminium sliding doors or bifolds?
Choose aluminium sliding doors if you want the most glass and fewest frames when the door is closed, and bifolds if you want almost the whole width open in summer. A slider keeps wide panels with slim meeting stiles but only opens part of the width; a bifold folds away but shows a frame every metre or so. Our sliding doors vs bifold doors guide compares them in detail.