- Postcode district
- NN17
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Uppingham, Desborough, Kettering
- Building rules
- England
Why choose aluminium sliding doors in Corby?
Here is what to weigh up if you are considering aluminium sliding doors for a home in Corby:
For a south- or west-facing garden in Corby, solar-control glass in the sliding panels can keep a glazed room more comfortable on summer afternoons.
Thinking about a dark frame for a house in Corby? Anthracite grey and black powder coats show off slim aluminium sightlines, and dual colour keeps the inside lighter if you prefer.
- Polyester powder coating is baked onto the aluminium in the factory, giving a hard, even colour that resists fading and chalking and does not need repainting in normal use.
- Because the panels slide rather than swing, nothing opens into the room or across the patio, leaving space for a dining table, sofa or planters right up to the glass.
- Panels run on adjustable tandem rollers along a hard-wearing track, so even a heavy double or triple glazed panel can be opened smoothly with one hand.
Planning glass for the light in Corby
The midday sun over Corby ranges from about 14° at the winter solstice to about 61° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
How much do aluminium sliding doors cost in Corby?
Guide prices are the same across Northamptonshire: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £3,295–£4,095 |
| 2.1 m | 2 panels | £3,995–£4,895 |
| 3.6 m | 3 panels | £5,595–£6,895 |
See every size on the aluminium sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Corby
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 4–6 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1 day for a two-panel straight swap; 1–2 days for larger doors for a door like this.
Rules for aluminium sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Specification choices for aluminium sliding doors in Corby
- Panel configuration. Two, three or four panels, with the sliding panel on the left, right or both sides to suit how you use the room.
- Handles and locks. Slim pull handles or lever handles in matching or contrasting finishes, with an enhanced security locking pack available.
- Glass. Double or triple glazed units in toughened or laminated safety glass, with solar-control or self-cleaning coatings.
Questions about aluminium sliding doors in Corby
How soon can you survey in Corby?
Surveys in the NN17 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks from survey sign-off.
How do you look after aluminium sliding doors?
Aluminium sliding doors need little care: wash the frames with mild soapy water a few times a year, vacuum grit out of the bottom track and keep the drainage slots clear. A light silicone spray on the locking points once a year keeps them smooth, and rollers can be adjusted if a panel starts to drag. Manufacturer guarantees on frames, hardware and sealed units are passed to you, and our workmanship guarantee is set out in writing in your quote.
Are aluminium sliding doors secure?
Aluminium sliding doors can be very secure when they combine multi-point hook locks, anti-lift blocks and laminated glass. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets, and an enhanced security locking pack can be added to your quote. Most systems are glazed from the inside, so the glass cannot be unclipped from outside.
How long do aluminium sliding doors take to arrive?
Aluminium sliding doors typically take 4–6 weeks to make after you sign off the surveyed specification, because each door is built to measure and powder coated to order. Fitting a straight swap of a two-panel door typically takes 1 day, and larger doors 1–2 days. These are typical times rather than promises, and we confirm a date once the order is placed.