- Postcode district
- SA13
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks from survey sign-off
- Guide price
- From £3,295 inc VAT
- Nearby
- Briton Ferry, Neath, Maesteg
- Building rules
- Wales
Aluminium sliding doors in Port Talbot: what to know
Here is what to weigh up if you are considering aluminium sliding doors for a home in Port Talbot:
Before aluminium sliding doors are ordered for a Port Talbot home, the survey should check the opening width, floor levels and existing lintel, so the quote reflects the real job.
For a south- or west-facing garden in Port Talbot, solar-control glass in the sliding panels can keep a glazed room more comfortable on summer afternoons.
- Narrow aluminium frames and meeting stiles put more of the opening into glass, so you see more garden and less frame than with a uPVC door of the same size.
- Because the panels slide rather than swing, nothing opens into the room or across the patio, leaving space for a dining table, sofa or planters right up to the glass.
- Polyester powder coating is baked onto the aluminium in the factory, giving a hard, even colour that resists fading and chalking and does not need repainting in normal use.
Light and sun in Port Talbot
Because Port Talbot sees long summer days (about 16 h 39 min) and short winter ones (about 7 h 49 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Guide prices for aluminium sliding doors in Port Talbot
Guide prices are the same across West Glamorgan: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £3,995–£4,895 |
| 4.8 m | 4 panels | £6,995–£8,495 |
| 6.0 m | 4 panels | £8,295–£10,095 |
See every size on the aluminium sliding doors page or try the guide price tool.
What happens when you order aluminium sliding doors in Port Talbot?
Surveys in the SA13 district are booked at a time that suits you. After you approve the quote, manufacture is typically 4–6 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1 day for a two-panel straight swap; 1–2 days for larger doors.
Rules for aluminium sliding doors in Wales
Wales sets its own Building Regulations guidance, including Approved Document L (Wales) for energy. A replacement sliding door must meet those requirements and use safety glass, and we arrange compliance through a registered installer or the local Building Control service.
Which options matter for aluminium sliding doors?
- Glass. Double or triple glazed units in toughened or laminated safety glass, with solar-control or self-cleaning coatings.
- Handles and locks. Slim pull handles or lever handles in matching or contrasting finishes, with an enhanced security locking pack available.
- Threshold. A standard or low threshold, or a flush finish with a drainage channel outside where floor levels allow.
Questions about aluminium sliding doors in Port Talbot
How soon can you survey in Port Talbot?
Surveys in the SA13 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks from survey sign-off.
How wide can an aluminium sliding door be?
An aluminium sliding door in our range can span from about 1.5 m to 6 m, split into two to four panels. Each panel is usually up to about 2.5–3 m wide depending on the system and the weight of the glass. Wider openings take more panels, and beyond about 6 m a multi-track or lift and slide system is usually the more practical choice.
How long do aluminium sliding doors take to arrive?
Aluminium sliding doors typically take 4–6 weeks to make after you sign off the surveyed specification, because each door is built to measure and powder coated to order. Fitting a straight swap of a two-panel door typically takes 1 day, and larger doors 1–2 days. These are typical times rather than promises, and we confirm a date once the order is placed.
How do you look after aluminium sliding doors?
Aluminium sliding doors need little care: wash the frames with mild soapy water a few times a year, vacuum grit out of the bottom track and keep the drainage slots clear. A light silicone spray on the locking points once a year keeps them smooth, and rollers can be adjusted if a panel starts to drag. Manufacturer guarantees on frames, hardware and sealed units are passed to you, and our workmanship guarantee is set out in writing in your quote.