- Postcode district
- BT35
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Warrenpoint, Banbridge, Tandragee
- Building rules
- Northern Ireland
Are corner sliding doors right for your Newry home?
A few practical points decide whether corner sliding doors suit a particular room and opening:
A Newry garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
Which way does your Newry garden face? A corner catching south and west sun gains warmth in winter but can overheat in summer, so solar-control glass is worth considering.
- Low or flush thresholds can run around both elevations, giving one continuous level line from the floor inside to a terrace that wraps the corner.
- Corner systems use thermally broken aluminium sections with slim sightlines and powder-coated finishes, so the frames stay discreet on both walls.
- A corner of glass gives a much wider field of view than a single straight door, taking in more of the garden from a seat inside.
How much sun will a door in Newry get?
At the latitude of Newry, the midday sun climbs to about 59° in late June but only about 12° in late December, when daylight lasts around 7 h 20 min against 17 h 11 min in midsummer. A south-facing corner sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Corner sliding doors prices in Newry
Guide prices include the door, fitting and structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 3.6 m | 4 panels | £9,595–£11,795 |
| 6.0 m | 6 panels | £13,395–£16,295 |
See every size on the corner sliding doors page or try the guide price tool.
From survey to fitted door in Newry
Here is the usual sequence in Newry: guide price, free survey, written quote, any building work, then manufacture (typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off). Fitting typically takes 1–2 days for the door, after 3–5 days of structural building work. Nearby, we also survey in Warrenpoint, Banbridge and Tandragee. Newry is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Rules for corner sliding doors in Northern Ireland
Opening up a wall in Northern Ireland needs district council building control approval and structural calculations. We take on this work in Northern Ireland by arrangement.
Which options matter for corner sliding doors?
- Colours. Single or dual colour powder coating, so the outside can match the extension cladding or render.
- Panel layout. Two panels per side for smaller corners or three per side for wider ones, with fixed panels at the far ends.
- Glass. Double or triple glazed safety glass, with solar-control coatings for corners facing south or west.
Questions about corner sliding doors in Newry
Do you fit corner sliding doors in Newry?
Yes, by arrangement. Newry is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
How big can a corner sliding door be?
A corner sliding door in our range typically covers about 3 m to 8 m of combined width across both walls, usually four panels up to about 4.8 m and six panels above that. The two sides do not need to be equal. Panel height starts at the standard 2.1 m and can go taller depending on the system, which is confirmed at survey alongside the structural design.
Do corner sliding doors need a steel beam?
Corner sliding doors almost always need engineered structural support, because removing the corner post takes away the support for the wall or roof above. A structural engineer designs a cantilevered beam or steel frame; the calculations are included in our guide prices and the steelwork is priced after survey. In England this needs a Building Regulations application and in Scotland a building warrant; Wales and Northern Ireland have their own building control rules.
How much do corner sliding doors cost?
Corner sliding doors start from a guide price of £8,695 for 3 m of combined width across both walls, fitted, inc VAT, at standard 2.1 m height. A 4.8 m combined corner is a guide £11,495–£13,995, and 8 m combined is around £16,495. Structural steel for the post-free corner is priced separately, and the final price is fixed in a written quote after survey.