- Postcode district
- NG10
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Ilkeston, Nottingham, Eastwood
- Building rules
- England
Corner sliding doors in Long Eaton: what to know
Before you settle on a door type, it helps to know what corner sliding doors do well and what to check before you order.
On any corner installation in Long Eaton, the survey records floor and patio levels along both walls, because a terrace that falls differently on each side changes the threshold detail.
If you are planning a wraparound extension in Long Eaton, designing corner sliding doors in from the start lets the engineer size the corner steelwork alongside the roof.
- With no post at the corner, sliding both sets of panels back opens the meeting point of two walls completely, so the room spills straight onto the patio.
- Because panels slide rather than fold, the corner can be opened on one side only, keeping the other side closed as a wind screen on cooler days.
- Daylight reaches the room from two directions, which keeps a deep extension brighter through the day as the sun moves round the house.
Sunlight, glass and orientation in Long Eaton
At the latitude of Long Eaton, the midday sun climbs to about 61° in late June but only about 14° in late December, when daylight lasts around 7 h 35 min against 16 h 55 min in midsummer. A south-facing corner sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for corner sliding doors in Long Eaton
Pricing does not change because you are in Long Eaton: the ranges below include fitting, structural calculations and VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 4.8 m | 4 panels | £11,495–£13,995 |
| 8.0 m | 6 panels | £16,495–£20,095 |
See every size on the corner sliding doors page or try the guide price tool.
From survey to fitted door in Long Eaton
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off), and fitting usually takes 1–2 days for the door, after 3–5 days of structural building work. If you are in Ilkeston or Nottingham, the same process and prices apply.
Do you need approval in Long Eaton?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Specification choices for corner sliding doors in Long Eaton
- Threshold. Standard, low or flush thresholds, with drainage detailed along both elevations.
- Colours. Single or dual colour powder coating, so the outside can match the extension cladding or render.
- System type. Standard aluminium, slimline or lift and slide corner systems, depending on panel size and the sightlines you want.
Questions about corner sliding doors in Long Eaton
How soon can you survey in Long Eaton?
Surveys in the NG10 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off.
How much do corner sliding doors cost?
Corner sliding doors start from a guide price of £8,695 for 3 m of combined width across both walls, fitted, inc VAT, at standard 2.1 m height. A 4.8 m combined corner is a guide £11,495–£13,995, and 8 m combined is around £16,495. Structural steel for the post-free corner is priced separately, and the final price is fixed in a written quote after survey.
Can I add a corner sliding door to an existing house?
A corner sliding door can be added to an existing house, but it is a structural project rather than a door swap: the corner of the building has to be rebuilt with engineered steel to carry the load where the post or wall used to be. It is usually done as part of an extension or rear remodel, and a survey plus an engineer's assessment confirm what the structure above needs.
How big can a corner sliding door be?
A corner sliding door in our range typically covers about 3 m to 8 m of combined width across both walls, usually four panels up to about 4.8 m and six panels above that. The two sides do not need to be equal. Panel height starts at the standard 2.1 m and can go taller depending on the system, which is confirmed at survey alongside the structural design.