- Postcode district
- EX8
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Sidmouth, Exeter, Newton Abbot
- Building rules
- England
Why choose corner sliding doors in Exmouth?
A few practical points decide whether corner sliding doors suit a particular room and opening:
An Exmouth garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
If you are planning a wraparound extension in Exmouth, designing corner sliding doors in from the start lets the engineer size the corner steelwork alongside the roof.
- When closed, the two corner panels interlock and lock together, so the glass corner stays weathertight and secure without a visible column.
- Low or flush thresholds can run around both elevations, giving one continuous level line from the floor inside to a terrace that wraps the corner.
- Each elevation can have its own number of panels and its own sliding direction, letting the opening suit the shape of the garden and the furniture layout.
Daylight in Exmouth and what it means for your glass
In Exmouth the shortest day has roughly 7 h 58 min of daylight and the longest about 16 h 29 min. The noon sun sits near 16° above the horizon in winter and 63° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
What should you budget for corner sliding doors in Exmouth?
Guide prices include the door, fitting and structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 4.8 m | 4 panels | £11,495–£13,995 |
| 8.0 m | 6 panels | £16,495–£20,095 |
See every size on the corner sliding doors page or try the guide price tool.
What happens when you order corner sliding doors in Exmouth?
Surveys in the EX8 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days for the door, after 3–5 days of structural building work.
Do you need approval in Exmouth?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Choosing the specification
- Panel layout. Two panels per side for smaller corners or three per side for wider ones, with fixed panels at the far ends.
- Roof junction. Head details coordinated with flat roofs, roof lanterns or pitched roofs so steel, frame and roof meet neatly.
- Glass. Double or triple glazed safety glass, with solar-control coatings for corners facing south or west.
Questions about corner sliding doors in Exmouth
How soon can you survey in Exmouth?
Surveys in the EX8 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off.
Do corner sliding doors lose more heat?
Corner sliding doors lose heat in proportion to their glazed area, so a large glass corner loses more than a solid wall would, but thermally broken systems keep typical whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better, and triple glazing is available. Wales, Scotland and Northern Ireland apply their own energy rules.
How big can a corner sliding door be?
A corner sliding door in our range typically covers about 3 m to 8 m of combined width across both walls, usually four panels up to about 4.8 m and six panels above that. The two sides do not need to be equal. Panel height starts at the standard 2.1 m and can go taller depending on the system, which is confirmed at survey alongside the structural design.
Do corner sliding doors need a steel beam?
Corner sliding doors almost always need engineered structural support, because removing the corner post takes away the support for the wall or roof above. A structural engineer designs a cantilevered beam or steel frame; the calculations are included in our guide prices and the steelwork is priced after survey. In England this needs a Building Regulations application and in Scotland a building warrant; Wales and Northern Ireland have their own building control rules.