- Postcode district
- CM7
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Coggeshall, Halstead, Witham
- Building rules
- England
Why choose corner sliding doors in Braintree?
These are the points a surveyor will go through with you when you choose corner sliding doors for a home in Braintree:
A Braintree garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
Which way does your Braintree garden face? A corner catching south and west sun gains warmth in winter but can overheat in summer, so solar-control glass is worth considering.
- A corner of glass gives a much wider field of view than a single straight door, taking in more of the garden from a seat inside.
- Corner systems use thermally broken aluminium sections with slim sightlines and powder-coated finishes, so the frames stay discreet on both walls.
- Daylight reaches the room from two directions, which keeps a deep extension brighter through the day as the sun moves round the house.
Planning glass for the light in Braintree
The midday sun over Braintree ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Typical costs for corner sliding doors around Braintree
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 4 panels | £9,595–£11,795 |
| 4.0 m | 4 panels | £10,295–£12,495 |
| 4.8 m | 4 panels | £11,495–£13,995 |
See every size on the corner sliding doors page or try the guide price tool.
How fitting works in Braintree
Here is the usual sequence in Braintree: guide price, free survey, written quote, any building work, then manufacture (typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off). Fitting typically takes 1–2 days for the door, after 3–5 days of structural building work. Nearby, we also survey in Coggeshall, Halstead and Witham.
Do you need approval in Braintree?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Finishes and extras for corner sliding doors
- System type. Standard aluminium, slimline or lift and slide corner systems, depending on panel size and the sightlines you want.
- Glass. Double or triple glazed safety glass, with solar-control coatings for corners facing south or west.
- Panel layout. Two panels per side for smaller corners or three per side for wider ones, with fixed panels at the far ends.
Questions about corner sliding doors in Braintree
Can you match other doors and windows in my Braintree home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How big can a corner sliding door be?
A corner sliding door in our range typically covers about 3 m to 8 m of combined width across both walls, usually four panels up to about 4.8 m and six panels above that. The two sides do not need to be equal. Panel height starts at the standard 2.1 m and can go taller depending on the system, which is confirmed at survey alongside the structural design.
Is the open corner a weak point for security?
The corner of a corner sliding door is not a weak point when the system is properly specified, because the two meeting panels interlock and lock together, typically with multi-point hardware at the corner as well as on the sliding edges. Laminated glass adds resistance to breaking through. Corner systems are available tested to PAS 24, and the locking specification is confirmed in your quote.
Do corner sliding doors need a steel beam?
Corner sliding doors almost always need engineered structural support, because removing the corner post takes away the support for the wall or roof above. A structural engineer designs a cantilevered beam or steel frame; the calculations are included in our guide prices and the steelwork is priced after survey. In England this needs a Building Regulations application and in Scotland a building warrant; Wales and Northern Ireland have their own building control rules.