- Postcode district
- GL1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Cheltenham, Stroud, Tewkesbury
- Building rules
- England
Are corner sliding doors right for your Gloucester home?
The right door depends on the opening, the room and the way you use the garden. Here is how corner sliding doors tend to work out in practice:
Where steel for a Gloucester corner extension would bear on a shared wall, the Party Wall etc. Act 1996 (England and Wales) may apply, so it is worth raising with neighbours early.
A Gloucester garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
- When closed, the two corner panels interlock and lock together, so the glass corner stays weathertight and secure without a visible column.
- Corner systems use thermally broken aluminium sections with slim sightlines and powder-coated finishes, so the frames stay discreet on both walls.
- Because panels slide rather than fold, the corner can be opened on one side only, keeping the other side closed as a wind screen on cooler days.
Daylight in Gloucester and what it means for your glass
At the latitude of Gloucester, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 46 min against 16 h 42 min in midsummer. A south-facing corner sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Corner sliding doors prices in Gloucester
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 4.0 m | 4 panels | £10,295–£12,495 |
| 4.8 m | 4 panels | £11,495–£13,995 |
| 6.0 m | 6 panels | £13,395–£16,295 |
See every size on the corner sliding doors page or try the guide price tool.
How fitting works in Gloucester
A surveyor visits your Gloucester home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off — and fitting usually takes 1–2 days for the door, after 3–5 days of structural building work.
Rules for corner sliding doors in England
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Options to consider for your corner sliding door
- Glass. Double or triple glazed safety glass, with solar-control coatings for corners facing south or west.
- Panel layout. Two panels per side for smaller corners or three per side for wider ones, with fixed panels at the far ends.
- System type. Standard aluminium, slimline or lift and slide corner systems, depending on panel size and the sightlines you want.
Questions about corner sliding doors in Gloucester
How soon can you survey in Gloucester?
Surveys in the GL1 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off.
Can I add a corner sliding door to an existing house?
A corner sliding door can be added to an existing house, but it is a structural project rather than a door swap: the corner of the building has to be rebuilt with engineered steel to carry the load where the post or wall used to be. It is usually done as part of an extension or rear remodel, and a survey plus an engineer's assessment confirm what the structure above needs.
How do you maintain a corner sliding door?
Maintaining a corner sliding door is much like any aluminium slider, with extra attention to the corner: keep both tracks and the corner drainage clear, wipe the corner seals, and check the meeting panels still lock smoothly. Rollers can be adjusted if a panel drops. Because a new extension can settle slightly in its first year, the corner panels may need a small adjustment after that.
Do corner sliding doors lose more heat?
Corner sliding doors lose heat in proportion to their glazed area, so a large glass corner loses more than a solid wall would, but thermally broken systems keep typical whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better, and triple glazing is available. Wales, Scotland and Northern Ireland apply their own energy rules.