- Postcode district
- BR6
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Chislehurst, Sidcup, Bromley
- Building rules
- England
Is a corner sliding door a good fit for your home in Orpington?
The right door depends on the opening, the room and the way you use the garden. Here is how corner sliding doors tend to work out in practice:
Corner glazing changes how an Orpington home looks from neighbouring gardens, so confirm the planning position for the extension with your designer or the local planning authority before ordering.
Where steel for an Orpington corner extension would bear on a shared wall, the Party Wall etc. Act 1996 (England and Wales) may apply, so it is worth raising with neighbours early.
- Low or flush thresholds can run around both elevations, giving one continuous level line from the floor inside to a terrace that wraps the corner.
- Corner systems use thermally broken aluminium sections with slim sightlines and powder-coated finishes, so the frames stay discreet on both walls.
- Daylight reaches the room from two directions, which keeps a deep extension brighter through the day as the sun moves round the house.
Light and sun in Orpington
In Orpington the shortest day has roughly 7 h 51 min of daylight and the longest about 16 h 37 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
How much do corner sliding doors cost in Orpington?
Guide prices include the door, fitting and structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 3.6 m | 4 panels | £9,595–£11,795 |
| 4.0 m | 4 panels | £10,295–£12,495 |
See every size on the corner sliding doors page or try the guide price tool.
How fitting works in Orpington
Surveys in the BR6 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days for the door, after 3–5 days of structural building work.
Do you need approval in Orpington?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Options to consider for your corner sliding door
- Panel layout. Two panels per side for smaller corners or three per side for wider ones, with fixed panels at the far ends.
- System type. Standard aluminium, slimline or lift and slide corner systems, depending on panel size and the sightlines you want.
- Threshold. Standard, low or flush thresholds, with drainage detailed along both elevations.
Questions about corner sliding doors in Orpington
How soon can you survey in Orpington?
Surveys in the BR6 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off.
How long does a corner sliding door project take?
A corner sliding door typically takes 4–6 weeks to manufacture in standard aluminium and 6–8 weeks for slimline or lift and slide systems, from survey sign-off. The steelwork and building work usually take 3–5 days before the door goes in, and fitting the door takes 1–2 days. Engineer design and approvals come first, so the door is ordered once the steel is designed.
Do corner sliding doors lose more heat?
Corner sliding doors lose heat in proportion to their glazed area, so a large glass corner loses more than a solid wall would, but thermally broken systems keep typical whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better, and triple glazing is available. Wales, Scotland and Northern Ireland apply their own energy rules.
Is the open corner a weak point for security?
The corner of a corner sliding door is not a weak point when the system is properly specified, because the two meeting panels interlock and lock together, typically with multi-point hardware at the corner as well as on the sliding edges. Laminated glass adds resistance to breaking through. Corner systems are available tested to PAS 24, and the locking specification is confirmed in your quote.