- Postcode district
- GU46
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Sandhurst, Crowthorne, Camberley
- Building rules
- England
Is a corner sliding door a good fit for your home in Yateley?
Here is what to weigh up if you are considering corner sliding doors for a home in Yateley:
Where steel for a Yateley corner extension would bear on a shared wall, the Party Wall etc. Act 1996 (England and Wales) may apply, so it is worth raising with neighbours early.
If you are planning a wraparound extension in Yateley, designing corner sliding doors in from the start lets the engineer size the corner steelwork alongside the roof.
- Low or flush thresholds can run around both elevations, giving one continuous level line from the floor inside to a terrace that wraps the corner.
- With no post at the corner, sliding both sets of panels back opens the meeting point of two walls completely, so the room spills straight onto the patio.
- Because panels slide rather than fold, the corner can be opened on one side only, keeping the other side closed as a wind screen on cooler days.
Light and sun in Yateley
The midday sun over Yateley ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
What should you budget for corner sliding doors in Yateley?
Pricing does not change because you are in Yateley: the ranges below include fitting, structural calculations and VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 3.6 m | 4 panels | £9,595–£11,795 |
| 4.8 m | 4 panels | £11,495–£13,995 |
See every size on the corner sliding doors page or try the guide price tool.
Timescales for corner sliding doors in Yateley
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off), and fitting usually takes 1–2 days for the door, after 3–5 days of structural building work. If you are in Sandhurst or Crowthorne, the same process and prices apply.
Do you need approval in Yateley?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Finishes and extras for corner sliding doors
- Colours. Single or dual colour powder coating, so the outside can match the extension cladding or render.
- Roof junction. Head details coordinated with flat roofs, roof lanterns or pitched roofs so steel, frame and roof meet neatly.
- Glass. Double or triple glazed safety glass, with solar-control coatings for corners facing south or west.
Questions about corner sliding doors in Yateley
Do I need building approval for corner sliding doors in Yateley?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Do corner sliding doors need a steel beam?
Corner sliding doors almost always need engineered structural support, because removing the corner post takes away the support for the wall or roof above. A structural engineer designs a cantilevered beam or steel frame; the calculations are included in our guide prices and the steelwork is priced after survey. In England this needs a Building Regulations application and in Scotland a building warrant; Wales and Northern Ireland have their own building control rules.
How big can a corner sliding door be?
A corner sliding door in our range typically covers about 3 m to 8 m of combined width across both walls, usually four panels up to about 4.8 m and six panels above that. The two sides do not need to be equal. Panel height starts at the standard 2.1 m and can go taller depending on the system, which is confirmed at survey alongside the structural design.
Do corner sliding doors lose more heat?
Corner sliding doors lose heat in proportion to their glazed area, so a large glass corner loses more than a solid wall would, but thermally broken systems keep typical whole-door U-values around 1.2–1.6 W/m²K double glazed. In England, a new door in an existing home with more than 60% glazing must achieve 1.4 W/m²K or better, and triple glazing is available. Wales, Scotland and Northern Ireland apply their own energy rules.