- Postcode district
- CT20
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Hythe, Dover, Ashford
- Building rules
- England
Corner sliding doors in Folkestone: what to know
Here is what to weigh up if you are considering corner sliding doors for a home in Folkestone:
Where steel for a Folkestone corner extension would bear on a shared wall, the Party Wall etc. Act 1996 (England and Wales) may apply, so it is worth raising with neighbours early.
Which way does your Folkestone garden face? A corner catching south and west sun gains warmth in winter but can overheat in summer, so solar-control glass is worth considering.
- When closed, the two corner panels interlock and lock together, so the glass corner stays weathertight and secure without a visible column.
- Corner systems use thermally broken aluminium sections with slim sightlines and powder-coated finishes, so the frames stay discreet on both walls.
- Each elevation can have its own number of panels and its own sliding direction, letting the opening suit the shape of the garden and the furniture layout.
How much sun will a door in Folkestone get?
Sun angles matter for big glazed doors. Around Folkestone, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
How much do corner sliding doors cost in Folkestone?
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 4.0 m | 4 panels | £10,295–£12,495 |
| 4.8 m | 4 panels | £11,495–£13,995 |
| 8.0 m | 6 panels | £16,495–£20,095 |
See every size on the corner sliding doors page or try the guide price tool.
How fitting works in Folkestone
A surveyor visits your Folkestone home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off — and fitting usually takes 1–2 days for the door, after 3–5 days of structural building work.
Do you need approval in Folkestone?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Finishes and extras for corner sliding doors
- Threshold. Standard, low or flush thresholds, with drainage detailed along both elevations.
- System type. Standard aluminium, slimline or lift and slide corner systems, depending on panel size and the sightlines you want.
- Roof junction. Head details coordinated with flat roofs, roof lanterns or pitched roofs so steel, frame and roof meet neatly.
Questions about corner sliding doors in Folkestone
Do you fit corner sliding doors in Folkestone?
Yes. We survey and fit corner sliding doors in Folkestone and across Kent, including nearby Hythe and Dover. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How much do corner sliding doors cost?
Corner sliding doors start from a guide price of £8,695 for 3 m of combined width across both walls, fitted, inc VAT, at standard 2.1 m height. A 4.8 m combined corner is a guide £11,495–£13,995, and 8 m combined is around £16,495. Structural steel for the post-free corner is priced separately, and the final price is fixed in a written quote after survey.
Is the open corner a weak point for security?
The corner of a corner sliding door is not a weak point when the system is properly specified, because the two meeting panels interlock and lock together, typically with multi-point hardware at the corner as well as on the sliding edges. Laminated glass adds resistance to breaking through. Corner systems are available tested to PAS 24, and the locking specification is confirmed in your quote.
How long does a corner sliding door project take?
A corner sliding door typically takes 4–6 weeks to manufacture in standard aluminium and 6–8 weeks for slimline or lift and slide systems, from survey sign-off. The steelwork and building work usually take 3–5 days before the door goes in, and fitting the door takes 1–2 days. Engineer design and approvals come first, so the door is ordered once the steel is designed.