Corner sliding doors across Mid Glamorgan
The right door depends on the opening, the room and the way you use the garden. Here is how corner sliding doors tend to work out in practice:
A Mid Glamorgan garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
Where steel for a Mid Glamorgan corner extension would bear on a shared wall, the Party Wall etc. Act 1996 (England and Wales) may apply, so it is worth raising with neighbours early.
- Because panels slide rather than fold, the corner can be opened on one side only, keeping the other side closed as a wind screen on cooler days.
- Corner systems use thermally broken aluminium sections with slim sightlines and powder-coated finishes, so the frames stay discreet on both walls.
- A corner of glass gives a much wider field of view than a single straight door, taking in more of the garden from a seat inside.
Guide prices for corner sliding doors in Mid Glamorgan
Guide prices include the door, fitting and structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 4.8 m | 4 panels | £11,495–£13,995 |
| 6.0 m | 6 panels | £13,395–£16,295 |
| 8.0 m | 6 panels | £16,495–£20,095 |
Every size is on the corner sliding doors page.
Daylight and glass in Mid Glamorgan
Sun angles matter for big glazed doors. Around Mid Glamorgan, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Towns we cover in Mid Glamorgan
We survey and fit corner sliding doors in 11 towns across Mid Glamorgan, including the CF31, CF34, CF36, CF37, CF40, CF44 postcode districts.
Approvals in Wales
Widening an opening in Wales means a Building Regulations application for the structural work, calculations for the beam, and a door that meets Approved Document L (Wales). Party wall notices may be needed in semi-detached and terraced homes.
Questions about corner sliding doors in Mid Glamorgan
Do I need building approval for corner sliding doors in Mid Glamorgan?
In Wales a replacement door must meet the Building Regulations as applied in Wales, arranged through a registered installer or Building Control. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How much do corner sliding doors cost?
Corner sliding doors start from a guide price of £8,695 for 3 m of combined width across both walls, fitted, inc VAT, at standard 2.1 m height. A 4.8 m combined corner is a guide £11,495–£13,995, and 8 m combined is around £16,495. Structural steel for the post-free corner is priced separately, and the final price is fixed in a written quote after survey.
How long does a corner sliding door project take?
A corner sliding door typically takes 4–6 weeks to manufacture in standard aluminium and 6–8 weeks for slimline or lift and slide systems, from survey sign-off. The steelwork and building work usually take 3–5 days before the door goes in, and fitting the door takes 1–2 days. Engineer design and approvals come first, so the door is ordered once the steel is designed.
How big can a corner sliding door be?
A corner sliding door in our range typically covers about 3 m to 8 m of combined width across both walls, usually four panels up to about 4.8 m and six panels above that. The two sides do not need to be equal. Panel height starts at the standard 2.1 m and can go taller depending on the system, which is confirmed at survey alongside the structural design.