- Postcode district
- TD9
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Selkirk, Jedburgh, Galashiels
- Building rules
- Scotland
Why choose corner sliding doors in Hawick?
A few practical points decide whether corner sliding doors suit a particular room and opening:
A Hawick garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
If you are planning a wraparound extension in Hawick, designing corner sliding doors in from the start lets the engineer size the corner steelwork alongside the roof.
- Corner systems use thermally broken aluminium sections with slim sightlines and powder-coated finishes, so the frames stay discreet on both walls.
- Low or flush thresholds can run around both elevations, giving one continuous level line from the floor inside to a terrace that wraps the corner.
- When closed, the two corner panels interlock and lock together, so the glass corner stays weathertight and secure without a visible column.
Daylight in Hawick and what it means for your glass
In Hawick the shortest day has roughly 7 h 04 min of daylight and the longest about 17 h 29 min. The noon sun sits near 11° above the horizon in winter and 58° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Typical costs for corner sliding doors around Hawick
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.6 m | 4 panels | £9,595–£11,795 |
| 4.8 m | 4 panels | £11,495–£13,995 |
| 6.0 m | 6 panels | £13,395–£16,295 |
See every size on the corner sliding doors page or try the guide price tool.
What happens when you order corner sliding doors in Hawick?
Here is the usual sequence in Hawick: guide price, free survey, written quote, any building work, then manufacture (typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off). Fitting typically takes 1–2 days for the door, after 3–5 days of structural building work. Nearby, we also survey in Selkirk, Jedburgh and Galashiels.
Do you need approval in Hawick?
A new opening in Scotland is warrant work: the council needs structural information for the beam and opening before building starts, and the finished door must meet the Scottish standards.
Options to consider for your corner sliding door
- Glass. Double or triple glazed safety glass, with solar-control coatings for corners facing south or west.
- Roof junction. Head details coordinated with flat roofs, roof lanterns or pitched roofs so steel, frame and roof meet neatly.
- System type. Standard aluminium, slimline or lift and slide corner systems, depending on panel size and the sightlines you want.
Questions about corner sliding doors in Hawick
Do you fit corner sliding doors in Hawick?
Yes. We survey and fit corner sliding doors in Hawick and across the Scottish Borders, including nearby Selkirk and Jedburgh. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How long does a corner sliding door project take?
A corner sliding door typically takes 4–6 weeks to manufacture in standard aluminium and 6–8 weeks for slimline or lift and slide systems, from survey sign-off. The steelwork and building work usually take 3–5 days before the door goes in, and fitting the door takes 1–2 days. Engineer design and approvals come first, so the door is ordered once the steel is designed.
Can I add a corner sliding door to an existing house?
A corner sliding door can be added to an existing house, but it is a structural project rather than a door swap: the corner of the building has to be rebuilt with engineered steel to carry the load where the post or wall used to be. It is usually done as part of an extension or rear remodel, and a survey plus an engineer's assessment confirm what the structure above needs.
How do you maintain a corner sliding door?
Maintaining a corner sliding door is much like any aluminium slider, with extra attention to the corner: keep both tracks and the corner drainage clear, wipe the corner seals, and check the meeting panels still lock smoothly. Rollers can be adjusted if a panel drops. Because a new extension can settle slightly in its first year, the corner panels may need a small adjustment after that.