- Postcode district
- SY1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Church Stretton, Telford, Oswestry
- Building rules
- England
Is a corner sliding door a good fit for your home in Shrewsbury?
Here is what to weigh up if you are considering corner sliding doors for a home in Shrewsbury:
On any corner installation in Shrewsbury, the survey records floor and patio levels along both walls, because a terrace that falls differently on each side changes the threshold detail.
Where steel for a Shrewsbury corner extension would bear on a shared wall, the Party Wall etc. Act 1996 (England and Wales) may apply, so it is worth raising with neighbours early.
- Daylight reaches the room from two directions, which keeps a deep extension brighter through the day as the sun moves round the house.
- Each elevation can have its own number of panels and its own sliding direction, letting the opening suit the shape of the garden and the furniture layout.
- Low or flush thresholds can run around both elevations, giving one continuous level line from the floor inside to a terrace that wraps the corner.
Planning glass for the light in Shrewsbury
Sun angles matter for big glazed doors. Around Shrewsbury, midday sun reaches about 61° in summer and drops to about 14° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Corner sliding doors prices in Shrewsbury
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 4.0 m | 4 panels | £10,295–£12,495 |
| 8.0 m | 6 panels | £16,495–£20,095 |
See every size on the corner sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Shrewsbury
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off), and fitting usually takes 1–2 days for the door, after 3–5 days of structural building work. If you are in Church Stretton or Telford, the same process and prices apply.
Do you need approval in Shrewsbury?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Options to consider for your corner sliding door
- Roof junction. Head details coordinated with flat roofs, roof lanterns or pitched roofs so steel, frame and roof meet neatly.
- Glass. Double or triple glazed safety glass, with solar-control coatings for corners facing south or west.
- Colours. Single or dual colour powder coating, so the outside can match the extension cladding or render.
Questions about corner sliding doors in Shrewsbury
How soon can you survey in Shrewsbury?
Surveys in the SY1 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off.
How much do corner sliding doors cost?
Corner sliding doors start from a guide price of £8,695 for 3 m of combined width across both walls, fitted, inc VAT, at standard 2.1 m height. A 4.8 m combined corner is a guide £11,495–£13,995, and 8 m combined is around £16,495. Structural steel for the post-free corner is priced separately, and the final price is fixed in a written quote after survey.
Can I add a corner sliding door to an existing house?
A corner sliding door can be added to an existing house, but it is a structural project rather than a door swap: the corner of the building has to be rebuilt with engineered steel to carry the load where the post or wall used to be. It is usually done as part of an extension or rear remodel, and a survey plus an engineer's assessment confirm what the structure above needs.
How do you maintain a corner sliding door?
Maintaining a corner sliding door is much like any aluminium slider, with extra attention to the corner: keep both tracks and the corner drainage clear, wipe the corner seals, and check the meeting panels still lock smoothly. Rollers can be adjusted if a panel drops. Because a new extension can settle slightly in its first year, the corner panels may need a small adjustment after that.