- Postcode district
- SA3
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off
- Guide price
- From £8,695 inc VAT
- Nearby
- Swansea, Gorseinon, Briton Ferry
- Building rules
- Wales
Corner sliding doors in Mumbles: what to know
The right door depends on the opening, the room and the way you use the garden. Here is how corner sliding doors tend to work out in practice:
A Mumbles garden that sits to the side as well as the rear of the house is where a post-free corner earns its place, opening the room towards both.
Corner glazing changes how a Mumbles home looks from neighbouring gardens, so confirm the planning position for the extension with your designer or the local planning authority before ordering.
- Low or flush thresholds can run around both elevations, giving one continuous level line from the floor inside to a terrace that wraps the corner.
- Because panels slide rather than fold, the corner can be opened on one side only, keeping the other side closed as a wind screen on cooler days.
- With no post at the corner, sliding both sets of panels back opens the meeting point of two walls completely, so the room spills straight onto the patio.
Daylight in Mumbles and what it means for your glass
In Mumbles the shortest day has roughly 7 h 49 min of daylight and the longest about 16 h 39 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
Corner sliding doors prices in Mumbles
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. The steelwork that supports the corner is designed by the engineer and priced after survey, because it depends on the building. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 4 panels | £8,695–£10,595 |
| 4.8 m | 4 panels | £11,495–£13,995 |
| 8.0 m | 6 panels | £16,495–£20,095 |
See every size on the corner sliding doors page or try the guide price tool.
From survey to fitted door in Mumbles
Surveys in the SA3 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for aluminium, 6–8 weeks for slimline or lift and slide corners, from survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days for the door, after 3–5 days of structural building work.
Rules for corner sliding doors in Wales
In Wales, structural work to form or widen an opening needs Building Regulations approval and structural calculations, and the new door must meet the Welsh energy and safety glazing requirements. The Party Wall etc. Act 1996 may apply where steelwork bears on a party wall.
Which options matter for corner sliding doors?
- System type. Standard aluminium, slimline or lift and slide corner systems, depending on panel size and the sightlines you want.
- Threshold. Standard, low or flush thresholds, with drainage detailed along both elevations.
- Glass. Double or triple glazed safety glass, with solar-control coatings for corners facing south or west.
Questions about corner sliding doors in Mumbles
Do I need building approval for corner sliding doors in Mumbles?
In Wales a replacement door must meet the Building Regulations as applied in Wales, arranged through a registered installer or Building Control. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Can I add a corner sliding door to an existing house?
A corner sliding door can be added to an existing house, but it is a structural project rather than a door swap: the corner of the building has to be rebuilt with engineered steel to carry the load where the post or wall used to be. It is usually done as part of an extension or rear remodel, and a survey plus an engineer's assessment confirm what the structure above needs.
Is the open corner a weak point for security?
The corner of a corner sliding door is not a weak point when the system is properly specified, because the two meeting panels interlock and lock together, typically with multi-point hardware at the corner as well as on the sliding edges. Laminated glass adds resistance to breaking through. Corner systems are available tested to PAS 24, and the locking specification is confirmed in your quote.
How long does a corner sliding door project take?
A corner sliding door typically takes 4–6 weeks to manufacture in standard aluminium and 6–8 weeks for slimline or lift and slide systems, from survey sign-off. The steelwork and building work usually take 3–5 days before the door goes in, and fitting the door takes 1–2 days. Engineer design and approvals come first, so the door is ordered once the steel is designed.