- Postcode district
- DH1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Chester-le-Street, Houghton-le-Spring, Stanley
- Building rules
- England
Is an internal glass sliding door a good fit for your home in Durham?
Here is what to weigh up if you are considering internal glass sliding doors for a home in Durham:
For a Durham terrace where the hallway gets almost no daylight, glazed internal doors are one way to borrow light from the rooms either side.
Knocking through two rooms in Durham to create an open-plan kitchen? A steel-look glass slider lets you keep the light and still shut the cooking in when you want.
- Reeded, fluted or frosted glass can obscure a home office or utility area while still letting light through, giving privacy without a solid wall.
- Glazing bars can be arranged in grids, single horizontal rails or plain full-height panes, so the door can be matched to a period house or a modern extension.
- Soft-close dampers ease the panel to a stop at either end of its travel, protecting fingers and the glass from the jolt of a door pushed too hard.
Daylight in Durham and what it means for your glass
Light travels further than you might expect through internal glass. When the noon sun in Durham sits at only about 12° in December, a glazed internal door lets light from a south-facing room reach the back of the house.
What should you budget for internal glass sliding doors in Durham?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Durham home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.2 m | 1 panel | £1,895–£2,395 |
| 1.6 m | 2 panels | £2,295–£2,795 |
| 2.4 m | 2 panels | £2,895–£3,495 |
See every size on the internal glass sliding doors page or try the guide price tool.
Timescales for internal glass sliding doors in Durham
A surveyor checks the doorway, the wall and the floor in your Durham home and talks through the glass or door finish. After you approve the written quote, the door is made typically 3–5 weeks after survey sign-off, and fitting usually takes around 1 day for a single or two-panel door.
Do you need approval in Durham?
Internal doors are generally outside the Building Regulations notification rules, with two things to watch: we only use safety glazing in glass doors, in line with Approved Document K, and any change to a load-bearing wall needs structural advice and Building Control approval.
Choosing the specification
- Bi-parting pair. Two panels that slide apart from the centre for a wide, symmetrical opening.
- Single sliding panel. One glass panel that slides across the wall, suiting standard doorways and studies.
- Ceiling-mounted track. Fixing the track to the ceiling where the wall above the opening is too shallow or not strong enough.
Questions about internal glass sliding doors in Durham
Can you match other doors and windows in my Durham home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How do I clean internal glass sliding doors?
Clean the glass with a soft cloth and a mild glass cleaner, and wipe the powder-coated frame with warm soapy water, avoiding abrasive pads. Keep the floor guide and top track free of dust and grit, which is what makes sliding doors feel stiff over time. Top-hung rollers do not normally need oiling.
Can internal glass sliding doors go into a new extension?
Yes, and fitting them as part of an extension is often simpler, because the builder can put solid timber or a lintel above the opening for the track while the walls are open. Tell us the finished floor and ceiling heights early so the panels can be sized accurately once the plastering is done.
What are steel-look internal sliding doors?
Steel-look internal sliding doors are glass doors with slim, dark aluminium frames and glazing bars designed to resemble traditional steel windows. Aluminium is used because it is lighter, does not rust and takes a durable powder-coat finish, while still giving the narrow sightlines that make the industrial style recognisable. They slide on a top track rather than swinging open.