- Postcode district
- SE10
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Blackheath, Lewisham, Catford
- Building rules
- England
What internal glass sliding doors offer homes in Greenwich
Before you settle on a door type, it helps to know what internal glass sliding doors do well and what to check before you order.
For a Greenwich terrace where the hallway gets almost no daylight, glazed internal doors are one way to borrow light from the rooms either side.
Knocking through two rooms in Greenwich to create an open-plan kitchen? A steel-look glass slider lets you keep the light and still shut the cooking in when you want.
- Soft-close dampers ease the panel to a stop at either end of its travel, protecting fingers and the glass from the jolt of a door pushed too hard.
- Slim powder-coated aluminium frames give the look of traditional steel glazing while being far lighter, which keeps the track and wall fixings simpler.
- Because the panel slides across the wall rather than into it, there is no need to open up the wall, making installation quicker and cleaner than a pocket door.
Light and sun in Greenwich
Light travels further than you might expect through internal glass. When the noon sun in Greenwich sits at only about 15° in December, a glazed internal door lets light from a south-facing room reach the back of the house.
Typical costs for internal glass sliding doors around Greenwich
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 0.9 m | 1 panel | £1,695–£2,095 |
| 1.6 m | 2 panels | £2,295–£2,795 |
| 3.2 m | 4 panels | £3,495–£4,295 |
See every size on the internal glass sliding doors page or try the guide price tool.
How fitting works in Greenwich
Here is the usual sequence in Greenwich: guide price, free survey, written quote, then manufacture (typically 3–5 weeks after survey sign-off). Fitting typically takes around 1 day for a single or two-panel door.
Rules for internal glass sliding doors in England
Internal doors are generally outside the Building Regulations notification rules, with two things to watch: we only use safety glazing in glass doors, in line with Approved Document K, and any change to a load-bearing wall needs structural advice and Building Control approval.
Finishes and extras for internal glass sliding doors
- Ceiling-mounted track. Fixing the track to the ceiling where the wall above the opening is too shallow or not strong enough.
- Grid glazing bars. A pattern of horizontal and vertical bars for the classic factory-window look.
- Reeded or fluted glass. Vertically ribbed glass that blurs the view through while keeping the room bright.
Questions about internal glass sliding doors in Greenwich
How soon can you survey in Greenwich?
Surveys in the SE10 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 3–5 weeks after survey sign-off.
How do I clean internal glass sliding doors?
Clean the glass with a soft cloth and a mild glass cleaner, and wipe the powder-coated frame with warm soapy water, avoiding abrasive pads. Keep the floor guide and top track free of dust and grit, which is what makes sliding doors feel stiff over time. Top-hung rollers do not normally need oiling.
Can the track be fixed to a plasterboard wall?
A top track can be fitted to a plasterboard wall only if there is solid support behind it, such as a timber header or noggins, because the track carries the full weight of the glass. Where the wall cannot take it, the track can often be fixed to the ceiling joists instead. We check the construction above the opening during the survey.
What are steel-look internal sliding doors?
Steel-look internal sliding doors are glass doors with slim, dark aluminium frames and glazing bars designed to resemble traditional steel windows. Aluminium is used because it is lighter, does not rust and takes a durable powder-coat finish, while still giving the narrow sightlines that make the industrial style recognisable. They slide on a top track rather than swinging open.