- Postcode district
- KT1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Surbiton, Teddington, New Malden
- Building rules
- England
Internal glass sliding doors in Kingston upon Thames: what to know
These are the points a surveyor will go through with you when you choose internal glass sliding doors for a home in Kingston upon Thames:
Converting a garage in Kingston upon Thames into a playroom or office? A glazed sliding door to the hallway keeps a line of sight into the room without leaving it open to the rest of the house.
Knocking through two rooms in Kingston upon Thames to create an open-plan kitchen? A steel-look glass slider lets you keep the light and still shut the cooking in when you want.
- The top track carries the panel, so the floor stays continuous across the doorway with only a discreet guide where the door parks.
- Every panel uses toughened or laminated safety glass, so if one is broken by accident it either crumbles into small blunt pieces or stays held together.
- Glazing bars can be arranged in grids, single horizontal rails or plain full-height panes, so the door can be matched to a period house or a modern extension.
How much sun will a door in Kingston upon Thames get?
Internal glazed doors are mostly about borrowed light. In Kingston upon Thames, winter daylight lasts only around 7 h 50 min, so a glass door between a bright extension and a darker hallway or dining room can make a noticeable difference from November to February.
Guide prices for internal glass sliding doors in Kingston upon Thames
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Kingston upon Thames home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.6 m | 2 panels | £2,295–£2,795 |
| 2.0 m | 2 panels | £2,595–£3,195 |
| 3.2 m | 4 panels | £3,495–£4,295 |
See every size on the internal glass sliding doors page or try the guide price tool.
How fitting works in Kingston upon Thames
Surveys in the KT1 district are booked at a time that suits you. Lead time is typically 3–5 weeks after survey sign-off; on fitting day the track or pocket is installed, the door is hung and adjusted, and the area is left clean. Fitting usually takes around 1 day for a single or two-panel door.
Rules for internal glass sliding doors in England
Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.
Choosing the specification
- Fixed side panel. A matching non-opening glass panel beside the door to fill a wider opening or form a glazed screen.
- Single sliding panel. One glass panel that slides across the wall, suiting standard doorways and studies.
- Reeded or fluted glass. Vertically ribbed glass that blurs the view through while keeping the room bright.
Questions about internal glass sliding doors in Kingston upon Thames
Do I need building approval for internal glass sliding doors in Kingston upon Thames?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How much does an internal glass sliding door cost?
Fitted internal glass sliding doors have a guide price of £1,695 for a single 900 mm panel, inc VAT at standard 2.1 m height, rising to £2,895–£3,495 for a 2,400 mm two-panel door. The glass type, number of glazing bars and track arrangement move the price within those ranges, and your written quote after survey fixes it.
What are steel-look internal sliding doors?
Steel-look internal sliding doors are glass doors with slim, dark aluminium frames and glazing bars designed to resemble traditional steel windows. Aluminium is used because it is lighter, does not rust and takes a durable powder-coat finish, while still giving the narrow sightlines that make the industrial style recognisable. They slide on a top track rather than swinging open.
Can internal glass sliding doors go into a new extension?
Yes, and fitting them as part of an extension is often simpler, because the builder can put solid timber or a lintel above the opening for the track while the walls are open. Tell us the finished floor and ceiling heights early so the panels can be sized accurately once the plastering is done.