- Postcode district
- CR4
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Morden, Tooting, Wimbledon
- Building rules
- England
Are internal glass sliding doors right for your Mitcham home?
The right door depends on the opening, the room and the way you use the garden. Here is how internal glass sliding doors tend to work out in practice:
Knocking through two rooms in Mitcham to create an open-plan kitchen? A steel-look glass slider lets you keep the light and still shut the cooking in when you want.
If you are extending a home in Mitcham, ask your builder to allow solid fixing above any opening where you want internal glass sliding doors, before the walls are boarded.
- Daylight from a bright room passes straight through to a darker one, so a north-facing hallway or inner room can feel lighter without adding a window.
- Soft-close dampers ease the panel to a stop at either end of its travel, protecting fingers and the glass from the jolt of a door pushed too hard.
- Slim powder-coated aluminium frames give the look of traditional steel glazing while being far lighter, which keeps the track and wall fixings simpler.
Planning glass for the light in Mitcham
Light travels further than you might expect through internal glass. When the noon sun in Mitcham sits at only about 15° in December, a glazed internal door lets light from a south-facing room reach the back of the house.
Typical costs for internal glass sliding doors around Mitcham
Guide prices are the same across Greater London. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 0.9 m | 1 panel | £1,695–£2,095 |
| 1.2 m | 1 panel | £1,895–£2,395 |
| 2.0 m | 2 panels | £2,595–£3,195 |
See every size on the internal glass sliding doors page or try the guide price tool.
Timescales for internal glass sliding doors in Mitcham
Surveys in the CR4 district are booked at a time that suits you. Lead time is typically 3–5 weeks after survey sign-off; on fitting day the track or pocket is installed, the door is hung and adjusted, and the area is left clean. Fitting usually takes around 1 day for a single or two-panel door.
Do you need approval in Mitcham?
Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.
Specification choices for internal glass sliding doors in Mitcham
- Ceiling-mounted track. Fixing the track to the ceiling where the wall above the opening is too shallow or not strong enough.
- Single sliding panel. One glass panel that slides across the wall, suiting standard doorways and studies.
- Bi-parting pair. Two panels that slide apart from the centre for a wide, symmetrical opening.
Questions about internal glass sliding doors in Mitcham
Do I need building approval for internal glass sliding doors in Mitcham?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
Can the track be fixed to a plasterboard wall?
A top track can be fitted to a plasterboard wall only if there is solid support behind it, such as a timber header or noggins, because the track carries the full weight of the glass. Where the wall cannot take it, the track can often be fixed to the ceiling joists instead. We check the construction above the opening during the survey.
Will a glass sliding door stop kitchen noise and smells?
A glass sliding door reduces noise and cooking smells but will not block them completely. Because the panel slides in front of the opening rather than closing against stops, small gaps remain at the edges. Brush seals help, and laminated glass can dampen sound a little more than toughened, but if you need a quiet, sealed room a hinged door is more effective.
What are steel-look internal sliding doors?
Steel-look internal sliding doors are glass doors with slim, dark aluminium frames and glazing bars designed to resemble traditional steel windows. Aluminium is used because it is lighter, does not rust and takes a durable powder-coat finish, while still giving the narrow sightlines that make the industrial style recognisable. They slide on a top track rather than swinging open.