- Postcode district
- CT1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off
- Guide price
- From £1,695 inc VAT
- Nearby
- Whitstable, Herne Bay, Faversham
- Building rules
- England
Are internal glass sliding doors right for your Canterbury home?
Before you settle on a door type, it helps to know what internal glass sliding doors do well and what to check before you order.
Knocking through two rooms in Canterbury to create an open-plan kitchen? A steel-look glass slider lets you keep the light and still shut the cooking in when you want.
Converting a garage in Canterbury into a playroom or office? A glazed sliding door to the hallway keeps a line of sight into the room without leaving it open to the rest of the house.
- The top track carries the panel, so the floor stays continuous across the doorway with only a discreet guide where the door parks.
- Soft-close dampers ease the panel to a stop at either end of its travel, protecting fingers and the glass from the jolt of a door pushed too hard.
- Glazing bars can be arranged in grids, single horizontal rails or plain full-height panes, so the door can be matched to a period house or a modern extension.
How much sun will a door in Canterbury get?
With roughly 7 h 52 min of daylight on the shortest day in Canterbury, rooms in the middle of a house can feel gloomy in winter. A glazed internal door shares light from the brightest room without losing the separation of a closed door.
How much do internal glass sliding doors cost in Canterbury?
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 0.9 m | 1 panel | £1,695–£2,095 |
| 1.6 m | 2 panels | £2,295–£2,795 |
| 2.4 m | 2 panels | £2,895–£3,495 |
See every size on the internal glass sliding doors page or try the guide price tool.
Timescales for internal glass sliding doors in Canterbury
Here is the usual sequence in Canterbury: guide price, free survey, written quote, then manufacture (typically 3–5 weeks after survey sign-off). Fitting typically takes around 1 day for a single or two-panel door.
Do you need approval in Canterbury?
Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.
Choosing the specification
- Ceiling-mounted track. Fixing the track to the ceiling where the wall above the opening is too shallow or not strong enough.
- Fixed side panel. A matching non-opening glass panel beside the door to fill a wider opening or form a glazed screen.
- Reeded or fluted glass. Vertically ribbed glass that blurs the view through while keeping the room bright.
Questions about internal glass sliding doors in Canterbury
Is the price different in Canterbury?
No. Guide prices for internal glass sliding doors are the same across mainland Britain, including Canterbury. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Can internal glass sliding doors go into a new extension?
Yes, and fitting them as part of an extension is often simpler, because the builder can put solid timber or a lintel above the opening for the track while the walls are open. Tell us the finished floor and ceiling heights early so the panels can be sized accurately once the plastering is done.
Do internal glass doors need safety glass?
Yes. We only supply safety glass for internal doors. In England, Approved Document K treats glazing in doors as a critical location, which means toughened or laminated glass classified to BS EN 12600. We specify safety glass for every panel we supply, whichever pattern or tint you choose, so the decorative choice never compromises safety.
How much space do I need beside the doorway?
A surface-mounted sliding door needs clear wall beside the opening that is at least as wide as the panel, so it has somewhere to park when open. For a bi-parting pair you need that space on both sides. Light switches, radiators and architraves in that zone may need moving or the design adjusting, which we check at survey.