Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Internal pocket doors
Internal pocket doors · CH5

Internal pocket doors in Connah's Quay

From the first guide price to the finished threshold, we handle internal pocket doors for homes in Connah's Quay (CH5): survey, made-to-measure manufacture and fitting.

Postcode district
CH5
Survey
Free for new and replacement doors
Typical lead time
Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
Guide price
From £895 inc VAT
Nearby
Deeside, Flint, Buckley
Building rules
Wales

Are internal pocket doors right for your Connah's Quay home?

Here is what to weigh up if you are considering internal pocket doors for a home in Connah's Quay:

Planning an open-plan kitchen in Connah's Quay but still want to close it off now and then? A double pocket door gives you both.

Where a Connah's Quay house has solid brick internal walls, a pocket door is still possible, but expect a new stud lining and more making good than in a timber partition.

  • Flush pulls sit level with the face of the door so the leaf can slide fully into the pocket, with a small edge pull to draw it back out again.
  • Privacy hook locks made for sliding leaves give a bathroom or en suite a door that locks from inside and can still be released from outside in an emergency.
  • A double pocket door, with two leaves parting from the centre, opens up a wide doorway between a kitchen and a living area without any doors standing in the room.

Light and sun in Connah's Quay

June 60°Dec 13°

In winter, Connah's Quay gets about 7 h 31 min of daylight against 16 h 59 min in June. Internal sliding and pocket doors help by keeping openings clear during the day and closing off rooms for warmth in the evening.

Typical costs for internal pocket doors around Connah's Quay

Guide prices are the same across Clwyd. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.

Typical costs for internal pocket doors around Connah's Quay
Overall widthTypical panelsGuide price (fitted, inc VAT)
Single pocket door1 leaf£895–£1,595
Double pocket door2 leaves£1,695–£2,795

See every size on the internal pocket doors page or try the guide price tool.

Survey, manufacture and fitting around Connah's Quay

Surveys in the CH5 district are booked at a time that suits you. Lead time is typically 3–5 weeks after survey sign-off, depending on the door leaf and finish; on fitting day the track or pocket is installed, the door is hung and adjusted, and the area is left clean. Fitting usually takes 1–2 days, plus drying time before new plaster can be decorated.

Rules for internal pocket doors in Wales

Internal sliding and pocket doors are not usually notifiable building work in Wales. We only supply safety glass for glazed doors, and any alteration to a load-bearing wall needs structural advice and approval from Building Control.

Specification choices for internal pocket doors in Connah's Quay

  • Glazed leaf. A door with safety glass panels that borrows daylight from one room for another.
  • Soft-close dampers. Hidden dampers in the track that ease the door to a gentle stop at each end.
  • Single pocket door. One leaf sliding into one side of the wall, the usual choice for en suites and cupboards.

Questions about internal pocket doors in Connah's Quay

Can you match other doors and windows in my Connah's Quay home?

Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.

Can a pocket door be fitted into an existing wall?

Yes, a pocket door can usually be fitted into an existing wall, but it involves opening up the wall beside the doorway. In a stud partition we remove the plasterboard, fit the pocket frame and board it again. In a masonry wall the usual approach is a new stud lining, and if the wall is load-bearing, forming the pocket becomes structural work that needs proper assessment and approval first.

How long does it take to fit a pocket door?

Fitting a pocket door typically takes one to two days, depending on whether the wall is stud or masonry and how much needs opening up. New plaster then needs time to dry before it can be decorated. We agree the order of work with you at survey so other trades, such as an electrician or decorator, can be booked around it.

Are pocket doors suitable for bathrooms?

Pocket doors work well for bathrooms and en suites, particularly small ones where a swinging door clashes with a basin or toilet. A privacy hook lock with an emergency release gives you a lockable door. Bear in mind that a pocket door does not seal as tightly as a hinged door closing against stops on all sides, so a little more sound can pass through.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote