Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Internal pocket doors
Internal pocket doors · EX23

Internal pocket doors in Bude

Our internal pocket doors are made to measure for each opening and fitted in Bude and nearby Launceston. The written quote fixes the price for the surveyed specification.

Postcode district
EX23
Survey
Free for new and replacement doors
Typical lead time
Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
Guide price
From £895 inc VAT
Nearby
Launceston, Bideford, Okehampton
Building rules
England

What internal pocket doors offer homes in Bude

Before you settle on a door type, it helps to know what internal pocket doors do well and what to check before you order.

If your Bude home has a cramped en suite where the door clashes with the basin, a pocket door is worth measuring for before you consider moving the sanitaryware.

Planning an open-plan kitchen in Bude but still want to close it off now and then? A double pocket door gives you both.

  • Flush pulls sit level with the face of the door so the leaf can slide fully into the pocket, with a small edge pull to draw it back out again.
  • A double pocket door, with two leaves parting from the centre, opens up a wide doorway between a kitchen and a living area without any doors standing in the room.
  • Reclaims the floor area a hinged door needs to swing, which in a small bathroom or cloakroom can be the difference between fitting a vanity unit and going without.

Light and sun in Bude

June 63°Dec 16°

With roughly 7 h 56 min of daylight on the shortest day in Bude, rooms in the middle of a house can feel gloomy in winter. A glazed internal door shares light from the brightest room without losing the separation of a closed door.

Guide prices for internal pocket doors in Bude

These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.

Guide prices for internal pocket doors in Bude
Overall widthTypical panelsGuide price (fitted, inc VAT)
Single pocket door1 leaf£895–£1,595
Double pocket door2 leaves£1,695–£2,795

See every size on the internal pocket doors page or try the guide price tool.

Survey, manufacture and fitting around Bude

Surveys in the EX23 district are booked at a time that suits you. Lead time is typically 3–5 weeks after survey sign-off, depending on the door leaf and finish; on fitting day the track or pocket is installed, the door is hung and adjusted, and the area is left clean. Fitting usually takes 1–2 days, plus drying time before new plaster can be decorated.

Rules for internal pocket doors in England

Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.

Specification choices for internal pocket doors in Bude

  • Flush and edge pulls. Recessed pulls in the door face plus an edge pull, so the leaf can disappear fully into the pocket.
  • Glazed leaf. A door with safety glass panels that borrows daylight from one room for another.
  • Single pocket door. One leaf sliding into one side of the wall, the usual choice for en suites and cupboards.

Questions about internal pocket doors in Bude

How soon can you survey in Bude?

Surveys in the EX23 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 3–5 weeks after survey sign-off, depending on the door leaf and finish.

Can I put a light switch on the wall with the pocket?

Not on the pocket section itself, because the door slides through that cavity and there is nowhere to run a cable or fix a back box. Switches and sockets can usually move to the other side of the doorway or to an adjoining wall. We point out any that need moving at survey, and an electrician should relocate them before the pocket frame goes in.

What is an internal pocket door?

An internal pocket door is an interior door that slides into a cavity built inside the wall instead of swinging on hinges. The leaf hangs from rollers on a concealed track at the top of a pocket frame, and the frame is boarded and plastered so the wall looks normal. When the door is open, only its edge and pull remain visible.

Are pocket doors suitable for bathrooms?

Pocket doors work well for bathrooms and en suites, particularly small ones where a swinging door clashes with a basin or toilet. A privacy hook lock with an emergency release gives you a lockable door. Bear in mind that a pocket door does not seal as tightly as a hinged door closing against stops on all sides, so a little more sound can pass through.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote