- Postcode district
- EH2
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
- Guide price
- From £895 inc VAT
- Nearby
- Musselburgh, Dalkeith, Bonnyrigg
- Building rules
- Scotland
Why choose internal pocket doors in Edinburgh?
The right door depends on the opening, the room and the way you use the garden. Here is how internal pocket doors tend to work out in practice:
In an Edinburgh hallway where three or four doors open into the same small space, swapping one or two for pocket doors can stop them colliding with each other.
If your Edinburgh home has a cramped en suite where the door clashes with the basin, a pocket door is worth measuring for before you consider moving the sanitaryware.
- A double pocket door, with two leaves parting from the centre, opens up a wide doorway between a kitchen and a living area without any doors standing in the room.
- Top-hung rollers carry the weight of the leaf from above, so there is no floor track to trip over, clean around or catch the vacuum cleaner on.
- Privacy hook locks made for sliding leaves give a bathroom or en suite a door that locks from inside and can still be released from outside in an emergency.
Planning glass for the light in Edinburgh
In winter, Edinburgh gets about 6 h 57 min of daylight against 17 h 36 min in June. Internal sliding and pocket doors help by keeping openings clear during the day and closing off rooms for warmth in the evening.
Internal pocket doors prices in Edinburgh
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Edinburgh home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| Single pocket door | 1 leaf | £895–£1,595 |
| Double pocket door | 2 leaves | £1,695–£2,795 |
See every size on the internal pocket doors page or try the guide price tool.
Timescales for internal pocket doors in Edinburgh
Surveys in the EH2 district are booked at a time that suits you. Lead time is typically 3–5 weeks after survey sign-off, depending on the door leaf and finish; on fitting day the track or pocket is installed, the door is hung and adjusted, and the area is left clean. Fitting usually takes 1–2 days, plus drying time before new plaster can be decorated.
Do you need approval in Edinburgh?
In Scotland, fitting an internal sliding or pocket door is usually warrant-free; we use safety glass in glazed doors, and alterations to structural walls need a building warrant.
Finishes and extras for internal pocket doors
- Single pocket door. One leaf sliding into one side of the wall, the usual choice for en suites and cupboards.
- Double pocket door. Two leaves sliding into opposite sides of the opening for a wider, centred doorway.
- Soft-close dampers. Hidden dampers in the track that ease the door to a gentle stop at each end.
Questions about internal pocket doors in Edinburgh
Do you fit internal pocket doors in Edinburgh?
Yes. We survey and fit internal pocket doors in Edinburgh and across Edinburgh and the Lothians, including nearby Musselburgh and Dalkeith. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Can I put a light switch on the wall with the pocket?
Not on the pocket section itself, because the door slides through that cavity and there is nowhere to run a cable or fix a back box. Switches and sockets can usually move to the other side of the doorway or to an adjoining wall. We point out any that need moving at survey, and an electrician should relocate them before the pocket frame goes in.
Do pocket doors need a floor track?
No, the pocket doors we fit hang from rollers on a top track, so the floor stays clear and level through the doorway. A small guide at the mouth of the pocket keeps the leaf running straight without a groove across the floor. That makes them easy to clean around and suitable where the same flooring runs from room to room.
Can a pocket door be fitted into an existing wall?
Yes, a pocket door can usually be fitted into an existing wall, but it involves opening up the wall beside the doorway. In a stud partition we remove the plasterboard, fit the pocket frame and board it again. In a masonry wall the usual approach is a new stud lining, and if the wall is load-bearing, forming the pocket becomes structural work that needs proper assessment and approval first.