- Postcode district
- SE26
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
- Guide price
- From £895 inc VAT
- Nearby
- Forest Hill, Beckenham, Catford
- Building rules
- England
Are internal pocket doors right for your Sydenham home?
Here is what to weigh up if you are considering internal pocket doors for a home in Sydenham:
In a Sydenham hallway where three or four doors open into the same small space, swapping one or two for pocket doors can stop them colliding with each other.
Where a Sydenham house has solid brick internal walls, a pocket door is still possible, but expect a new stud lining and more making good than in a timber partition.
- Flush pulls sit level with the face of the door so the leaf can slide fully into the pocket, with a small edge pull to draw it back out again.
- Privacy hook locks made for sliding leaves give a bathroom or en suite a door that locks from inside and can still be released from outside in an emergency.
- Soft-close dampers can slow the door in its final few centimetres in both directions, stopping it slamming shut or bouncing back out of the pocket.
Planning glass for the light in Sydenham
Internal glazed doors are mostly about borrowed light. In Sydenham, winter daylight lasts only around 7 h 50 min, so a glass door between a bright extension and a darker hallway or dining room can make a noticeable difference from November to February.
Guide prices for internal pocket doors in Sydenham
These are guide prices for fitted doors, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| Single pocket door | 1 leaf | £895–£1,595 |
| Double pocket door | 2 leaves | £1,695–£2,795 |
See every size on the internal pocket doors page or try the guide price tool.
What happens when you order internal pocket doors in Sydenham?
Surveys in the SE26 district are booked at a time that suits you. Lead time is typically 3–5 weeks after survey sign-off, depending on the door leaf and finish; on fitting day the track or pocket is installed, the door is hung and adjusted, and the area is left clean. Fitting usually takes 1–2 days, plus drying time before new plaster can be decorated.
Rules for internal pocket doors in England
Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.
Choosing the specification
- Single pocket door. One leaf sliding into one side of the wall, the usual choice for en suites and cupboards.
- Double pocket door. Two leaves sliding into opposite sides of the opening for a wider, centred doorway.
- Bathroom privacy lock. A hook lock with an emergency release, designed for doors that slide rather than swing.
Questions about internal pocket doors in Sydenham
Can you match other doors and windows in my Sydenham home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Are pocket doors suitable for bathrooms?
Pocket doors work well for bathrooms and en suites, particularly small ones where a swinging door clashes with a basin or toilet. A privacy hook lock with an emergency release gives you a lockable door. Bear in mind that a pocket door does not seal as tightly as a hinged door closing against stops on all sides, so a little more sound can pass through.
Can I put a light switch on the wall with the pocket?
Not on the pocket section itself, because the door slides through that cavity and there is nowhere to run a cable or fix a back box. Switches and sockets can usually move to the other side of the doorway or to an adjoining wall. We point out any that need moving at survey, and an electrician should relocate them before the pocket frame goes in.
What is an internal pocket door?
An internal pocket door is an interior door that slides into a cavity built inside the wall instead of swinging on hinges. The leaf hangs from rollers on a concealed track at the top of a pocket frame, and the frame is boarded and plastered so the wall looks normal. When the door is open, only its edge and pull remain visible.