Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Internal pocket doors
Internal pocket doors · OL1

Internal pocket doors in Oldham

Internal pocket doors, surveyed and fitted in Oldham. You get published guide prices up front, a free survey for new and replacement doors, and a fixed quote for the exact door you choose.

Postcode district
OL1
Survey
Free for new and replacement doors
Typical lead time
Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
Guide price
From £895 inc VAT
Nearby
Middleton, Ashton-under-Lyne, Saddleworth
Building rules
England

Is an internal pocket door a good fit for your home in Oldham?

The right door depends on the opening, the room and the way you use the garden. Here is how internal pocket doors tend to work out in practice:

Before arranging a survey at your Oldham home, check whether the wall beside the doorway carries radiators, sockets or pipes, because those decide whether internal pocket doors will fit.

Renovating a period property in Oldham? Pocket doors can take panelled leaves that echo the existing doors, so the change looks considered rather than out of place.

  • Soft-close dampers can slow the door in its final few centimetres in both directions, stopping it slamming shut or bouncing back out of the pocket.
  • Flush pulls sit level with the face of the door so the leaf can slide fully into the pocket, with a small edge pull to draw it back out again.
  • A double pocket door, with two leaves parting from the centre, opens up a wide doorway between a kitchen and a living area without any doors standing in the room.

Sunlight, glass and orientation in Oldham

June 60°Dec 13°

Light travels further than you might expect through internal glass. When the noon sun in Oldham sits at only about 13° in December, a glazed internal door lets light from a south-facing room reach the back of the house.

Guide prices for internal pocket doors in Oldham

Guide prices are the same across Greater Manchester. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.

Guide prices for internal pocket doors in Oldham
Overall widthTypical panelsGuide price (fitted, inc VAT)
Single pocket door1 leaf£895–£1,595
Double pocket door2 leaves£1,695–£2,795

See every size on the internal pocket doors page or try the guide price tool.

From survey to fitted door in Oldham

Here is the usual sequence in Oldham: guide price, free survey, written quote, then manufacture (typically 3–5 weeks after survey sign-off, depending on the door leaf and finish). Fitting typically takes 1–2 days, plus drying time before new plaster can be decorated.

Do you need approval in Oldham?

Internal doors are generally outside the Building Regulations notification rules, with two things to watch: we only use safety glazing in glass doors, in line with Approved Document K, and any change to a load-bearing wall needs structural advice and Building Control approval.

Specification choices for internal pocket doors in Oldham

  • Glazed leaf. A door with safety glass panels that borrows daylight from one room for another.
  • Single pocket door. One leaf sliding into one side of the wall, the usual choice for en suites and cupboards.
  • Flush and edge pulls. Recessed pulls in the door face plus an edge pull, so the leaf can disappear fully into the pocket.

Questions about internal pocket doors in Oldham

Can you match other doors and windows in my Oldham home?

Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.

Can I put a light switch on the wall with the pocket?

Not on the pocket section itself, because the door slides through that cavity and there is nowhere to run a cable or fix a back box. Switches and sockets can usually move to the other side of the doorway or to an adjoining wall. We point out any that need moving at survey, and an electrician should relocate them before the pocket frame goes in.

How long does it take to fit a pocket door?

Fitting a pocket door typically takes one to two days, depending on whether the wall is stud or masonry and how much needs opening up. New plaster then needs time to dry before it can be decorated. We agree the order of work with you at survey so other trades, such as an electrician or decorator, can be booked around it.

Are pocket doors suitable for bathrooms?

Pocket doors work well for bathrooms and en suites, particularly small ones where a swinging door clashes with a basin or toilet. A privacy hook lock with an emergency release gives you a lockable door. Bear in mind that a pocket door does not seal as tightly as a hinged door closing against stops on all sides, so a little more sound can pass through.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote