- Postcode district
- SO40
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
- Guide price
- From £895 inc VAT
- Nearby
- Southampton, Romsey, Eastleigh
- Building rules
- England
What internal pocket doors offer homes in Totton
The right door depends on the opening, the room and the way you use the garden. Here is how internal pocket doors tend to work out in practice:
Planning an open-plan kitchen in Totton but still want to close it off now and then? A double pocket door gives you both.
Renovating a period property in Totton? Pocket doors can take panelled leaves that echo the existing doors, so the change looks considered rather than out of place.
- A double pocket door, with two leaves parting from the centre, opens up a wide doorway between a kitchen and a living area without any doors standing in the room.
- Reclaims the floor area a hinged door needs to swing, which in a small bathroom or cloakroom can be the difference between fitting a vanity unit and going without.
- The door leaf can be chosen to match the other internal doors in the house, such as painted panels, oak veneer or a glazed design, so it does not look out of place.
Light and sun in Totton
Internal glazed doors are mostly about borrowed light. In Totton, winter daylight lasts only around 7 h 55 min, so a glass door between a bright extension and a darker hallway or dining room can make a noticeable difference from November to February.
Internal pocket doors prices in Totton
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Totton home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| Single pocket door | 1 leaf | £895–£1,595 |
| Double pocket door | 2 leaves | £1,695–£2,795 |
See every size on the internal pocket doors page or try the guide price tool.
How fitting works in Totton
A surveyor checks the doorway, the wall and the floor in your Totton home and talks through the glass or door finish. After you approve the written quote, the door is made typically 3–5 weeks after survey sign-off, depending on the door leaf and finish, and fitting usually takes 1–2 days, plus drying time before new plaster can be decorated.
Do you need approval in Totton?
Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.
Choosing the specification
- Double pocket door. Two leaves sliding into opposite sides of the opening for a wider, centred doorway.
- Glazed leaf. A door with safety glass panels that borrows daylight from one room for another.
- Flush and edge pulls. Recessed pulls in the door face plus an edge pull, so the leaf can disappear fully into the pocket.
Questions about internal pocket doors in Totton
Is the price different in Totton?
No. Guide prices for internal pocket doors are the same across mainland Britain, including Totton. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Are pocket doors suitable for bathrooms?
Pocket doors work well for bathrooms and en suites, particularly small ones where a swinging door clashes with a basin or toilet. A privacy hook lock with an emergency release gives you a lockable door. Bear in mind that a pocket door does not seal as tightly as a hinged door closing against stops on all sides, so a little more sound can pass through.
What is an internal pocket door?
An internal pocket door is an interior door that slides into a cavity built inside the wall instead of swinging on hinges. The leaf hangs from rollers on a concealed track at the top of a pocket frame, and the frame is boarded and plastered so the wall looks normal. When the door is open, only its edge and pull remain visible.
Can I put a light switch on the wall with the pocket?
Not on the pocket section itself, because the door slides through that cavity and there is nowhere to run a cable or fix a back box. Switches and sockets can usually move to the other side of the doorway or to an adjoining wall. We point out any that need moving at survey, and an electrician should relocate them before the pocket frame goes in.