Made-to-measure sliding doors, supplied and fitted· Free survey for new doors
0800 088 6248
Internal pocket doors
Internal pocket doors · ST13

Internal pocket doors in Leek

From the first guide price to the finished threshold, we handle internal pocket doors for homes in Leek (ST13): survey, made-to-measure manufacture and fitting.

Postcode district
ST13
Survey
Free for new and replacement doors
Typical lead time
Typically 3–5 weeks after survey sign-off, depending on the door leaf and finish
Guide price
From £895 inc VAT
Nearby
Congleton, Kidsgrove, Stoke-on-Trent
Building rules
England

Are internal pocket doors right for your Leek home?

A few practical points decide whether internal pocket doors suit a particular room and opening:

Before arranging a survey at your Leek home, check whether the wall beside the doorway carries radiators, sockets or pipes, because those decide whether internal pocket doors will fit.

Planning an open-plan kitchen in Leek but still want to close it off now and then? A double pocket door gives you both.

  • Privacy hook locks made for sliding leaves give a bathroom or en suite a door that locks from inside and can still be released from outside in an emergency.
  • Top-hung rollers carry the weight of the leaf from above, so there is no floor track to trip over, clean around or catch the vacuum cleaner on.
  • Soft-close dampers can slow the door in its final few centimetres in both directions, stopping it slamming shut or bouncing back out of the pocket.

Light and sun in Leek

June 60°Dec 13°

Light travels further than you might expect through internal glass. When the noon sun in Leek sits at only about 13° in December, a glazed internal door lets light from a south-facing room reach the back of the house.

What should you budget for internal pocket doors in Leek?

The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Leek home has been measured.

What should you budget for internal pocket doors in Leek?
Overall widthTypical panelsGuide price (fitted, inc VAT)
Single pocket door1 leaf£895–£1,595
Double pocket door2 leaves£1,695–£2,795

See every size on the internal pocket doors page or try the guide price tool.

What happens when you order internal pocket doors in Leek?

Here is the usual sequence in Leek: guide price, free survey, written quote, then manufacture (typically 3–5 weeks after survey sign-off, depending on the door leaf and finish). Fitting typically takes 1–2 days, plus drying time before new plaster can be decorated.

Rules for internal pocket doors in England

Fitting an internal sliding or pocket door is not usually notifiable building work in England. Approved Document K treats glass in doors as a critical location, so we only supply safety glass for internal doors. If a wall has to be altered to form a pocket, check first whether it is load-bearing.

Which options matter for internal pocket doors?

  • Flush and edge pulls. Recessed pulls in the door face plus an edge pull, so the leaf can disappear fully into the pocket.
  • Bathroom privacy lock. A hook lock with an emergency release, designed for doors that slide rather than swing.
  • Soft-close dampers. Hidden dampers in the track that ease the door to a gentle stop at each end.

Questions about internal pocket doors in Leek

Do you fit internal pocket doors in Leek?

Yes. We survey and fit internal pocket doors in Leek and across Staffordshire, including nearby Congleton and Kidsgrove. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.

How much does an internal pocket door cost?

Our guide price for a fitted internal pocket door is £895–£1,595 for a single and £1,695–£2,795 for a double, inc VAT at standard height. Where your door falls in that range depends on the leaf, the hardware, the wall construction and how much making good is needed. The final figure is fixed in a written quote after we have surveyed the wall.

Can I put a light switch on the wall with the pocket?

Not on the pocket section itself, because the door slides through that cavity and there is nowhere to run a cable or fix a back box. Switches and sockets can usually move to the other side of the doorway or to an adjoining wall. We point out any that need moving at survey, and an electrician should relocate them before the pocket frame goes in.

Do pocket doors need a floor track?

No, the pocket doors we fit hang from rollers on a top track, so the floor stays clear and level through the doorway. A small guide at the mouth of the pocket keeps the leaf running straight without a groove across the floor. That makes them easy to clean around and suitable where the same flooring runs from room to room.

Ready to price your sliding doors?

Use the guide price tool, or book a free survey and fixed written quote.

CallGet a quote