- Postcode district
- EX17
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,995 inc VAT
- Nearby
- Exeter, Tiverton, Okehampton
- Building rules
- England
Large floor-to-ceiling sliding doors in Crediton: what to know
Here is what to weigh up if you are considering large floor-to-ceiling sliding doors for a home in Crediton:
Your structural engineer for a Crediton project should know the door system before designing the steel, because sliders need a beam that barely deflects over the full span.
If your Crediton extension has a higher ceiling than the rest of the house, panels around 2.7 m high carry the glass right up and avoid a strip of wall above the door.
- A flush threshold with an outside drainage channel lets a large opening work as a level route between the kitchen floor and the terrace.
- Designing the door and steel together lets the engineer allow for panel weight and tight deflection limits, so the sliding gear runs true across the full span.
- Toughened and laminated safety glass is specified to suit the size and position of each panel, meeting the safety glazing requirements for glass in doors.
Light and sun in Crediton
Because Crediton sees long summer days (about 16 h 30 min) and short winter ones (about 7 h 57 min), the elevation your door faces makes a real difference. With the midday sun at about 16° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Typical costs for large floor-to-ceiling sliding doors around Crediton
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Crediton home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,995–£9,795 |
| 4.8 m | 3 panels | £12,595–£15,395 |
| 6.0 m | 3 panels | £14,895–£18,095 |
See every size on the large floor-to-ceiling sliding doors page or try the guide price tool.
Timescales for large floor-to-ceiling sliding doors in Crediton
Surveys in the EX17 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks from survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work for the opening, then 1–2 days to fit the door.
Do you need approval in Crediton?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Choosing the specification
- Glass. Triple glazing, solar-control, acoustic laminated or low-iron glass for a clearer, less green tint.
- Integral blinds. Blinds sealed between the panes on some systems, giving shade on a big glass wall without curtains to clean.
- System type. Heavy-duty aluminium, slimline for the narrowest interlocks, or lift and slide for the largest panels.
Questions about large floor-to-ceiling sliding doors in Crediton
Can you match other doors and windows in my Crediton home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How tall can a sliding door be?
A sliding door can typically be up to about 2.5–3 m tall on standard aluminium systems, and taller on some lift and slide and slimline systems, depending on panel width and glass weight. Our large door range is priced on 2.7 m high panels. Taller doors need heavier glass and stronger support above, so the maximum for your opening is confirmed at survey.
How do you clean tall sliding doors?
Clean tall sliding doors with a long-handled squeegee or water-fed pole outside and a step and microfibre cloth inside, avoiding abrasive pads that can scratch glass coatings. Vacuum the track, clear the drainage channel and check the rollers run quietly. Self-cleaning glass outside can reduce how often the top of each panel needs attention, and the drainage channel is worth checking after heavy rain because a big door sheds a lot of water.
Do large sliding doors need a steel beam?
Large sliding doors usually need a steel beam or frame, because most are fitted into a new or widened structural opening. In England that is structural work needing a Building Regulations application and structural calculations, which are included in our guide price for forming the opening; in Scotland it needs a building warrant, and Wales and Northern Ireland have their own approval routes. The beam must be stiff enough not to deflect onto the door.