- Postcode district
- SW13
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,995 inc VAT
- Nearby
- Putney, Chiswick, Hammersmith
- Building rules
- England
Why choose large floor-to-ceiling sliding doors in Barnes?
Here is what to weigh up if you are considering large floor-to-ceiling sliding doors for a home in Barnes:
If your Barnes extension has a higher ceiling than the rest of the house, panels around 2.7 m high carry the glass right up and avoid a strip of wall above the door.
Large large floor-to-ceiling sliding doors change the look of the back of a Barnes house dramatically, so if it is listed, a flat or covered by an Article 4 direction, check the planning position first.
- Toughened and laminated safety glass is specified to suit the size and position of each panel, meeting the safety glazing requirements for glass in doors.
- Designing the door and steel together lets the engineer allow for panel weight and tight deflection limits, so the sliding gear runs true across the full span.
- Fewer, bigger panels mean fewer vertical frames across a wide opening, giving a calmer, less broken view than a run of standard-sized doors.
How much sun will a door in Barnes get?
Daylight in Barnes runs from about 7 h 50 min in December to 16 h 38 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Guide prices for large floor-to-ceiling sliding doors in Barnes
Guide prices are the same across Greater London. They cover the door supplied and fitted into a prepared opening, including VAT, with options itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,995–£9,795 |
| 3.0 m | 2 panels | £9,195–£11,195 |
| 4.0 m | 2 panels | £11,095–£13,495 |
See every size on the large floor-to-ceiling sliding doors page or try the guide price tool.
From survey to fitted door in Barnes
A surveyor visits your Barnes home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks from survey sign-off — and fitting usually takes 3–5 days of building work for the opening, then 1–2 days to fit the door.
Do you need approval in Barnes?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Specification choices for large floor-to-ceiling sliding doors in Barnes
- Integral blinds. Blinds sealed between the panes on some systems, giving shade on a big glass wall without curtains to clean.
- Glass. Triple glazing, solar-control, acoustic laminated or low-iron glass for a clearer, less green tint.
- Colours. Single or dual colour powder coating, with dark finishes such as black or anthracite grey to frame the view.
Questions about large floor-to-ceiling sliding doors in Barnes
Can you match other doors and windows in my Barnes home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How long do large sliding doors take?
Large sliding doors typically take 6–8 weeks to make after survey sign-off, as most use slimline or lift and slide systems with large glass units. Forming the opening typically takes 3–5 days of building work, and fitting the door 1–2 days with a larger team and lifting equipment where needed. Each stage is a typical duration, and dates are agreed once you order.
Do large sliding doors need a steel beam?
Large sliding doors usually need a steel beam or frame, because most are fitted into a new or widened structural opening. In England that is structural work needing a Building Regulations application and structural calculations, which are included in our guide price for forming the opening; in Scotland it needs a building warrant, and Wales and Northern Ireland have their own approval routes. The beam must be stiff enough not to deflect onto the door.
Will a wall of glass make my room cold?
A wall of glass does not have to make a room cold if the system is thermally broken and well glazed; typical whole-door U-values are around 1.2–1.6 W/m²K double glazed and 0.8–1.1 W/m²K triple glazed. In England, a door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better, while Wales, Scotland and Northern Ireland set their own requirements. South-facing glass also gains useful winter sun.