- Postcode district
- NW4
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,995 inc VAT
- Nearby
- Golders Green, Finchley, Mill Hill
- Building rules
- England
Why choose large floor-to-ceiling sliding doors in Hendon?
These are the points a surveyor will go through with you when you choose large floor-to-ceiling sliding doors for a home in Hendon:
Large large floor-to-ceiling sliding doors change the look of the back of a Hendon house dramatically, so if it is listed, a flat or covered by an Article 4 direction, check the planning position first.
Where the only access to the back of a Hendon home is a side gate or the house itself, large glass panels may need lifting equipment, and the survey plans the route.
- Fewer, bigger panels mean fewer vertical frames across a wide opening, giving a calmer, less broken view than a run of standard-sized doors.
- Panels around 2.7 m high carry the glass up to the ceiling line, so the wall reads as glass and daylight reaches deep into an open-plan room.
- High-load rollers and, on the biggest panels, lift and slide gear let heavy glass move smoothly, so a tall panel opens without straining.
How much sun will a door in Hendon get?
At the latitude of Hendon, the midday sun climbs to about 62° in late June but only about 15° in late December, when daylight lasts around 7 h 49 min against 16 h 39 min in midsummer. A south-facing large floor-to-ceiling sliding door lets that low winter sun deep into the room; on a west or south elevation, solar-control glass keeps summer afternoons comfortable.
Guide prices for large floor-to-ceiling sliding doors in Hendon
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Hendon home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,995–£9,795 |
| 3.6 m | 2 panels | £10,295–£12,595 |
| 8.0 m | 4 panels | £18,695–£22,795 |
See every size on the large floor-to-ceiling sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Hendon
Surveys in the NW4 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 6–8 weeks from survey sign-off; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work for the opening, then 1–2 days to fit the door.
Rules for large floor-to-ceiling sliding doors in England
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Finishes and extras for large floor-to-ceiling sliding doors
- Colours. Single or dual colour powder coating, with dark finishes such as black or anthracite grey to frame the view.
- Panel height. 2.7 m as standard in this range, with taller panels possible on some systems and confirmed at survey.
- Integral blinds. Blinds sealed between the panes on some systems, giving shade on a big glass wall without curtains to clean.
Questions about large floor-to-ceiling sliding doors in Hendon
Can you match other doors and windows in my Hendon home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
How long do large sliding doors take?
Large sliding doors typically take 6–8 weeks to make after survey sign-off, as most use slimline or lift and slide systems with large glass units. Forming the opening typically takes 3–5 days of building work, and fitting the door 1–2 days with a larger team and lifting equipment where needed. Each stage is a typical duration, and dates are agreed once you order.
Do large sliding doors need a steel beam?
Large sliding doors usually need a steel beam or frame, because most are fitted into a new or widened structural opening. In England that is structural work needing a Building Regulations application and structural calculations, which are included in our guide price for forming the opening; in Scotland it needs a building warrant, and Wales and Northern Ireland have their own approval routes. The beam must be stiff enough not to deflect onto the door.
How tall can a sliding door be?
A sliding door can typically be up to about 2.5–3 m tall on standard aluminium systems, and taller on some lift and slide and slimline systems, depending on panel width and glass weight. Our large door range is priced on 2.7 m high panels. Taller doors need heavier glass and stronger support above, so the maximum for your opening is confirmed at survey.