- Postcode district
- BT52
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Portstewart, Portrush, Ballymoney
- Building rules
- Northern Ireland
Is a lift and slide door a good fit for your home in Coleraine?
A few practical points decide whether lift and slide doors suit a particular room and opening:
When you want a door left a hand's width open on a breezy day in Coleraine, a lowered lift and slide panel stays exactly where it is set.
Before lift and slide doors are ordered for a Coleraine extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
- Multi-point locks engage as the panel drops into its closed position, and the weight of the lowered sash adds to the resistance against it being lifted from outside.
- Low thresholds of around 15–25 mm, or a flush finish with external drainage, are possible on many systems, so even a heavy door can give level access to a terrace.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
Sunlight, glass and orientation in Coleraine
Daylight in Coleraine runs from about 7 h 08 min in December to 17 h 24 min in June, with the noon sun at roughly 11° and 58° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
How much do lift and slide doors cost in Coleraine?
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,595–£10,495 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
Survey, manufacture and fitting around Coleraine
A surveyor visits your Coleraine home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 6–8 weeks from survey sign-off — and fitting usually takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. We also cover Portstewart (6 km north-west) and Portrush (7 km north). Coleraine is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Do you need approval in Coleraine?
In Northern Ireland, the Building Regulations (Northern Ireland) apply through your district council's building control service, with energy guidance in Technical Booklet F1. Work in Northern Ireland is by arrangement, and we confirm the approval route for your property at survey.
Which options matter for lift and slide doors?
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Material. Thermally broken aluminium, or timber and alu-clad timber lift and slide systems for a warmer interior look.
Questions about lift and slide doors in Coleraine
How soon can you survey in Coleraine?
Survey dates in the BT52 district are arranged individually when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.