- Postcode district
- EH22
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Bonnyrigg, Musselburgh, Edinburgh
- Building rules
- Scotland
Is a lift and slide door a good fit for your home in Dalkeith?
Here is what to weigh up if you are considering lift and slide doors for a home in Dalkeith:
Before lift and slide doors are ordered for a Dalkeith extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
If rear access to your Dalkeith property is tight, the survey plans how panels weighing several hundred kilograms will be delivered and lifted into place.
- Geared lifting hardware lets one person move a panel weighing several hundred kilograms with a gentle push, which ordinary sliding rollers could not manage.
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
- Deep, thermally broken frames carry thick triple glazed units where needed, with typical whole-door U-values around 0.8–1.1 W/m²K at that specification.
Planning glass for the light in Dalkeith
Sun angles matter for big glazed doors. Around Dalkeith, midday sun reaches about 58° in summer and drops to about 11° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
How much do lift and slide doors cost in Dalkeith?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Dalkeith home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,595–£10,495 |
| 3.6 m | 2 panels | £9,695–£11,795 |
See every size on the lift and slide doors page or try the guide price tool.
Survey, manufacture and fitting around Dalkeith
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Do you need approval in Dalkeith?
Scottish building standards still apply to a replacement door even where no warrant is needed, so the door must meet the energy and safety glazing requirements. If the opening is being formed or widened, a building warrant is required before work begins.
Options to consider for your lift and slide door
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Handle. A long lever handle sized for the lifting gear, in a finish to match the frame, with a key-locking option.
Questions about lift and slide doors in Dalkeith
Do you fit lift and slide doors in Dalkeith?
Yes. We survey and fit lift and slide doors in Dalkeith and across Edinburgh and the Lothians, including nearby Bonnyrigg and Musselburgh. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Are lift and slide doors secure?
Lift and slide doors are secure when specified with multi-point locking and laminated glass, because the lowered panel sits on the frame and the locks engage as it drops. Systems are available tested to PAS 24, the UK enhanced security standard for doorsets, and a key-locking handle can be added. The sheer weight of the panel also makes forcing it out of the track much harder.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
How heavy and wide can lift and slide panels be?
Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.