- Postcode district
- CR4
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Morden, Tooting, Wimbledon
- Building rules
- England
What lift and slide doors offer homes in Mitcham
A few practical points decide whether lift and slide doors suit a particular room and opening:
If rear access to your Mitcham property is tight, the survey plans how panels weighing several hundred kilograms will be delivered and lifted into place.
When you want a door left a hand's width open on a breezy day in Mitcham, a lowered lift and slide panel stays exactly where it is set.
- Deep, thermally broken frames carry thick triple glazed units where needed, with typical whole-door U-values around 0.8–1.1 W/m²K at that specification.
- Multi-point locks engage as the panel drops into its closed position, and the weight of the lowered sash adds to the resistance against it being lifted from outside.
- Geared lifting hardware lets one person move a panel weighing several hundred kilograms with a gentle push, which ordinary sliding rollers could not manage.
Sunlight, glass and orientation in Mitcham
Daylight in Mitcham runs from about 7 h 51 min in December to 16 h 37 min in June, with the noon sun at roughly 15° and 62° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
Lift and slide doors prices in Mitcham
Guide prices are the same across Greater London: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 3.0 m | 2 panels | £8,595–£10,495 |
| 3.6 m | 2 panels | £9,695–£11,795 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
Timescales for lift and slide doors in Mitcham
Here is the usual sequence in Mitcham: guide price, free survey, written quote, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. Nearby, we also survey in Morden, Tooting and Wimbledon.
Rules for lift and slide doors in England
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Specification choices for lift and slide doors in Mitcham
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Glass. Double or triple glazed safety glass, with acoustic laminated or solar-control units for exposed or noisy sites.
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
Questions about lift and slide doors in Mitcham
Is the price different in Mitcham?
No. Guide prices for lift and slide doors are the same across mainland Britain, including Mitcham. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.