- Postcode district
- TW9
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Twickenham, Hounslow, Barnes
- Building rules
- England
What lift and slide doors offer homes in Richmond
These are the points a surveyor will go through with you when you choose lift and slide doors for a home in Richmond:
Comparing lift and slide with slimline for a Richmond project usually comes down to one question: do panel size and sealing matter more to you than the narrowest possible interlock?
When you want a door left a hand's width open on a breezy day in Richmond, a lowered lift and slide panel stays exactly where it is set.
- Low thresholds of around 15–25 mm, or a flush finish with external drainage, are possible on many systems, so even a heavy door can give level access to a terrace.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
- Geared lifting hardware lets one person move a panel weighing several hundred kilograms with a gentle push, which ordinary sliding rollers could not manage.
Daylight in Richmond and what it means for your glass
Sun angles matter for big glazed doors. Around Richmond, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Typical costs for lift and slide doors around Richmond
Guide prices are the same across Greater London: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 4.0 m | 2 panels | £10,395–£12,695 |
| 6.0 m | 3 panels | £13,995–£16,995 |
See every size on the lift and slide doors page or try the guide price tool.
How fitting works in Richmond
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Do you need approval in Richmond?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Specification choices for lift and slide doors in Richmond
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Material. Thermally broken aluminium, or timber and alu-clad timber lift and slide systems for a warmer interior look.
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
Questions about lift and slide doors in Richmond
Do you fit lift and slide doors in Richmond?
Yes. We survey and fit lift and slide doors in Richmond and across Greater London, including nearby Twickenham and Hounslow. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
How heavy and wide can lift and slide panels be?
Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.
Are lift and slide doors more weathertight than standard sliders?
Lift and slide doors are generally more weathertight than standard inline sliders, because the panel's weight compresses firm gaskets when closed instead of relying on brush seals it rubs past. Typical whole-door U-values are around 1.2–1.6 W/m²K double glazed and 0.8–1.1 W/m²K triple glazed. In England, a door in an existing home with more than 60% glazing must reach 1.4 W/m²K or better; Wales, Scotland and Northern Ireland have their own rules.