- Postcode district
- TN13
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Westerham, Tonbridge, Orpington
- Building rules
- England
Why choose lift and slide doors in Sevenoaks?
Here is what to weigh up if you are considering lift and slide doors for a home in Sevenoaks:
Before lift and slide doors are ordered for a Sevenoaks extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
Comparing lift and slide with slimline for a Sevenoaks project usually comes down to one question: do panel size and sealing matter more to you than the narrowest possible interlock?
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
- Larger panels mean fewer interlocks across a wide opening, so a door of four to six metres can be made in just two or three sections.
- Low thresholds of around 15–25 mm, or a flush finish with external drainage, are possible on many systems, so even a heavy door can give level access to a terrace.
How much sun will a door in Sevenoaks get?
Sun angles matter for big glazed doors. Around Sevenoaks, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Typical costs for lift and slide doors around Sevenoaks
Pricing is transparent and does not change because you are in Sevenoaks. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,595–£10,495 |
| 4.0 m | 2 panels | £10,395–£12,695 |
See every size on the lift and slide doors page or try the guide price tool.
What happens when you order lift and slide doors in Sevenoaks?
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened for a door like this.
Do you need approval in Sevenoaks?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Choosing the specification
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Handle. A long lever handle sized for the lifting gear, in a finish to match the frame, with a key-locking option.
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
Questions about lift and slide doors in Sevenoaks
Is the price different in Sevenoaks?
No. Guide prices for lift and slide doors are the same across mainland Britain, including Sevenoaks. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.
Will I need Building Regulations approval for a large lift and slide door?
A large lift and slide door often needs Building Regulations approval for the structural work, because forming or widening an opening in England needs an application, structural calculations and usually a steel beam. The door itself is a controlled fitting, installed by a competent person scheme installer or notified to Building Control, with safety glazing throughout. Scotland needs a building warrant for a new or wider opening; Wales and Northern Ireland have their own rules.
How heavy and wide can lift and slide panels be?
Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.