- Postcode district
- LE2
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- Wigston Magna, Leicester, Earl Shilton
- Building rules
- England
Are lift and slide doors right for your Oadby home?
Here is what to weigh up if you are considering lift and slide doors for a home in Oadby:
If your Oadby home has an exposed elevation that takes driving rain, the compressed seals of lift and slide doors give a tighter closure than brush-sealed sliders.
Before lift and slide doors are ordered for an Oadby extension, the structural engineer needs the panel weights so the beam and its bearings can be designed to carry them.
- When the handle is turned down, the full weight of the panel compresses the seals, giving firmer resistance to draughts and driving rain than a brush-sealed slider.
- A lowered panel sits on the frame rather than its rollers, so a part-open door will not drift in a gust and can be left a hand's width open for fresh air.
- Geared lifting hardware lets one person move a panel weighing several hundred kilograms with a gentle push, which ordinary sliding rollers could not manage.
Planning glass for the light in Oadby
Daylight in Oadby runs from about 7 h 38 min in December to 16 h 51 min in June, with the noon sun at roughly 14° and 61° respectively. Use that to choose your glass: standard low-E double glazing for north and east elevations, and consider solar-control or triple glazing for sunny south and west walls.
What should you budget for lift and slide doors in Oadby?
The table shows guide prices for common sizes, supplied and fitted, including VAT. Your exact price is fixed in a written quote once the opening in your Oadby home has been measured.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,595–£10,495 |
| 3.6 m | 2 panels | £9,695–£11,795 |
See every size on the lift and slide doors page or try the guide price tool.
How fitting works in Oadby
Here is the usual sequence in Oadby: guide price, free survey, written quote, then manufacture (typically 6–8 weeks from survey sign-off). Fitting typically takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened. Nearby, we also survey in Wigston Magna, Leicester and Earl Shilton.
Rules for lift and slide doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for lift and slide doors
- Handle. A long lever handle sized for the lifting gear, in a finish to match the frame, with a key-locking option.
- Material. Thermally broken aluminium, or timber and alu-clad timber lift and slide systems for a warmer interior look.
- Threshold. Standard, low or flush threshold, the flush version with a drainage channel set into the terrace.
Questions about lift and slide doors in Oadby
How soon can you survey in Oadby?
Surveys in the LE2 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
How heavy and wide can lift and slide panels be?
Lift and slide panels can typically be larger and heavier than standard sliding panels, often several hundred kilograms each, depending on the system and glass. Our range covers overall widths from about 2.4 m to 6 m in two or three panels. Very large panels need a structural opening sized for them and careful handling, often with lifting equipment, which is planned at survey.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.