- Postcode district
- NR27
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £7,495 inc VAT
- Nearby
- North Walsham, Fakenham, Norwich
- Building rules
- England
What lift and slide doors offer homes in Cromer
The right door depends on the opening, the room and the way you use the garden. Here is how lift and slide doors tend to work out in practice:
If rear access to your Cromer property is tight, the survey plans how panels weighing several hundred kilograms will be delivered and lifted into place.
If your Cromer home has an exposed elevation that takes driving rain, the compressed seals of lift and slide doors give a tighter closure than brush-sealed sliders.
- Multi-point locks engage as the panel drops into its closed position, and the weight of the lowered sash adds to the resistance against it being lifted from outside.
- Deep, thermally broken frames carry thick triple glazed units where needed, with typical whole-door U-values around 0.8–1.1 W/m²K at that specification.
- Larger panels mean fewer interlocks across a wide opening, so a door of four to six metres can be made in just two or three sections.
Sunlight, glass and orientation in Cromer
The midday sun over Cromer ranges from about 14° at the winter solstice to about 61° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
How much do lift and slide doors cost in Cromer?
These are guide prices for fitted doors at a standard height, including VAT. They run from an entry-level system to a premium one at the same size; the survey confirms which suits your opening.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,595–£10,495 |
| 4.0 m | 2 panels | £10,395–£12,695 |
See every size on the lift and slide doors page or try the guide price tool.
From survey to fitted door in Cromer
Surveys in the NR27 district are booked at a time that suits you. After you approve the quote, manufacture is typically 6–8 weeks from survey sign-off; on fitting day the old door comes out, the new frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 1–2 days, plus 3–5 days of building work beforehand if the opening is new or widened.
Do you need approval in Cromer?
English Building Regulations treat a new or replacement external door in an existing home as a controlled fitting: it needs a U-value of 1.4 W/m²K or better (or Doorset Energy Rating band C) if more than 60% of it is glazed (Approved Document L), and safety glass in a critical location (Approved Document K). Compliance is arranged through a competent person scheme installer or a Building Control notification, so you get a certificate for your records.
Options to consider for your lift and slide door
- Soft close. Damped closing, available on some systems, stops a heavy panel arriving hard against the frame.
- Panel layout. One sliding and one fixed panel, two sliders meeting in the middle, or three panels for wider openings.
- Material. Thermally broken aluminium, or timber and alu-clad timber lift and slide systems for a warmer interior look.
Questions about lift and slide doors in Cromer
How soon can you survey in Cromer?
Surveys in the NR27 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 6–8 weeks from survey sign-off.
What is the lead time for a lift and slide door?
A lift and slide door typically takes 6–8 weeks to manufacture after you sign off the surveyed specification, reflecting the heavy-duty hardware and large glass units. Fitting typically takes 1–2 days with a larger team. If the opening is being formed or widened, allow 3–5 days of building work beforehand. These are typical times, confirmed once the order is placed.
How does a lift and slide door work?
A lift and slide door works through a geared handle: turn it and the mechanism raises the panel a few millimetres onto rollers so it slides freely; turn it back and the panel lowers onto the frame, compressing the seals. The seals are never dragged while the panel moves, which helps them last, and the lowered panel stays exactly where you leave it.
How much is a lift and slide door?
A lift and slide door starts from a guide price of £7,495 for a 2.4 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 3.6 m door is a guide £9,695–£11,795, and a 6 m three-panel door is around £13,995. Height, triple glazing and finish move the figure within the range, and the final price is fixed in a written quote after survey.