- Postcode district
- DD1
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Monifieth, Cupar, Carnoustie
- Building rules
- Scotland
Are sliding doors for new openings right for your Dundee home?
Most homeowners choosing sliding doors for new openings want the same things: more light, a clear view and a door that is easy to live with.
Living in a Dundee flat? Structural changes to an external wall almost always need the agreement of the building's owner or the other owners, so speak to them first.
Where a Dundee house has a bay, chimney breast or upstairs window directly above the planned opening, the engineer will need to account for it in the steel design.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
- Temporary propping holds up the wall above while the masonry is cut out, keeping floors, ceilings and the roof safely supported throughout the work.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
Planning glass for the light in Dundee
Because Dundee sees long summer days (about 17 h 45 min) and short winter ones (about 6 h 50 min), the elevation your door faces makes a real difference. With the midday sun at about 10° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Guide prices for sliding doors for new openings in Dundee
Use these guide prices to budget for the whole job in Dundee: the door, the steelwork, making good and the engineer's calculations, including VAT. Building Control or warrant fees are charged by the council on top.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £6,995–£7,795 |
| 2.1 m | 2 panels | £7,495–£8,295 |
| 4.0 m | 3 panels | £10,295–£11,595 |
See every size on the sliding doors for new openings page or try the guide price tool.
How fitting works in Dundee
Surveys in the DD1 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Do you need approval in Dundee?
A new opening in Scotland is warrant work: the council needs structural information for the beam and opening before building starts, and the finished door must meet the Scottish standards.
Options to consider for your sliding door for a new opening
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
- Widening an existing door. Removing masonry each side of an old patio door to take a wider slider.
- Steel beam with padstones. A beam sized by the engineer to carry the wall, floors and roof above.
Questions about sliding doors for new openings in Dundee
Do you fit sliding doors for new openings in Dundee?
Yes. We survey and fit sliding doors for new openings in Dundee and across Angus and Dundee, including nearby Monifieth and Cupar. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.
Do I need building regulations to widen a door opening?
Yes, forming or widening an opening is structural work and needs a Building Regulations application in England, supported by structural calculations. Building Control inspects the work, typically including the steel and its bearings. In Scotland a building warrant is needed. Wales and Northern Ireland follow their own building regulations through local authority or district council building control.