- Postcode district
- SL7
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Maidenhead, High Wycombe, Henley-on-Thames
- Building rules
- England
Why choose sliding doors for new openings in Marlow?
A few practical points decide whether sliding doors for new openings suit a particular room and opening:
Turning a Marlow kitchen window into a door to the garden? Check where drains, gullies and air bricks sit outside, because they can affect the new threshold.
For homes in Marlow that are listed or covered by an Article 4 direction, ask the council about the new opening before paying for structural calculations.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
- Structural calculations are included in the guide price, and the Building Regulations application is handled as part of the project, so you are not left coordinating engineers and inspectors.
Light and sun in Marlow
Because Marlow sees long summer days (about 16 h 39 min) and short winter ones (about 7 h 49 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Typical costs for sliding doors for new openings around Marlow
These figures combine an aluminium sliding door with the building work to form or widen the opening, including structural calculations and VAT. Your price is fixed in a written quote once the wall in your Marlow home has been surveyed; council fees are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.5 m | 2 panels | £6,595–£7,295 |
| 2.4 m | 2 panels | £7,895–£8,895 |
| 4.8 m | 4 panels | £11,495–£12,995 |
See every size on the sliding doors for new openings page or try the guide price tool.
Survey, manufacture and fitting around Marlow
Surveys in the SL7 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Rules for sliding doors for new openings in England
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Finishes and extras for sliding doors for new openings
- Widening an existing door. Removing masonry each side of an old patio door to take a wider slider.
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Concealed steel. Setting the beam so it sits above the ceiling line, giving a cleaner head detail inside.
Questions about sliding doors for new openings in Marlow
Can you match other doors and windows in my Marlow home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.
Do I need planning permission for a new opening?
Planning rules for altering an elevation depend on the property and where you are, so it is worth checking with your council before you commit. Flats, listed buildings and properties covered by an Article 4 direction are the most likely to need consent. Wales and Scotland have their own planning rules. Our planning guide sets out the questions to ask.