- Postcode district
- CB2
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Royston, Newmarket, Saffron Walden
- Building rules
- England
New and widened openings for sliding doors in Cambridge: what to know
The right door depends on the opening, the room and the way you use the garden. Here is how sliding doors for new openings tend to work out in practice:
If your Cambridge home is semi-detached or terraced and the new steel would sit on the shared wall, budget time for party wall notices before work starts.
For homes in Cambridge that are listed or covered by an Article 4 direction, ask the council about the new opening before paying for structural calculations.
- If the work affects a party wall, notice can be served under the Party Wall etc. Act 1996 (England and Wales) before it starts, avoiding disputes with neighbours later.
- The door is measured from the finished opening rather than from drawings, so it fits the opening as built, not as it was intended to be built.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
Light and sun in Cambridge
Because Cambridge sees long summer days (about 16 h 46 min) and short winter ones (about 7 h 42 min), the elevation your door faces makes a real difference. With the midday sun at about 14° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
How much do sliding doors for new openings cost in Cambridge?
Use these guide prices to budget for the whole job in Cambridge: the door, the steelwork, making good and the engineer's calculations, including VAT. Building Control or warrant fees are charged by the council on top.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £7,495–£8,295 |
| 2.4 m | 2 panels | £7,895–£8,895 |
| 4.0 m | 3 panels | £10,295–£11,595 |
See every size on the sliding doors for new openings page or try the guide price tool.
How fitting works in Cambridge
Surveys in the CB2 district are booked at a time that suits you. Once the opening is ready and measured, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals; on fitting day the frame is set level and sealed, and the panels are adjusted so they glide properly. Fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Rules for sliding doors for new openings in England
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Specification choices for sliding doors for new openings in Cambridge
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
- Steel beam with padstones. A beam sized by the engineer to carry the wall, floors and roof above.
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
Questions about sliding doors for new openings in Cambridge
How soon can you survey in Cambridge?
Surveys in the CB2 district are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.
How much does it cost to widen an opening for sliding doors?
Our guide price for forming or widening an opening is £3,595 for 2.4 m and £4,495 for 4.8 m, covering steel, padstones, making good and structural calculations. The door is priced separately, and Building Control fees are set by your council. All figures are guide prices inc VAT, fixed in a written quote after we survey the wall and see what is above it.
Does the Party Wall Act apply to my new opening?
The Party Wall etc. Act 1996 (England and Wales) may apply if the new steel beam bears on, or is cut into, a wall you share with a neighbour, as is common in semi-detached and terraced houses. If it applies, you must serve notice on the neighbour before the work starts. A rear wall entirely on your own property is less likely to be affected.