New and widened openings for sliding doors across Cheshire
A few practical points decide whether sliding doors for new openings suit a particular room and opening:
For homes in Cheshire that are listed or covered by an Article 4 direction, ask the council about the new opening before paying for structural calculations.
Living in a Cheshire flat? Structural changes to an external wall almost always need the agreement of the building's owner or the other owners, so speak to them first.
- The door is measured from the finished opening rather than from drawings, so it fits the opening as built, not as it was intended to be built.
- Temporary propping holds up the wall above while the masonry is cut out, keeping floors, ceilings and the roof safely supported throughout the work.
- Structural calculations are included in the guide price, and the Building Regulations application is handled as part of the project, so you are not left coordinating engineers and inspectors.
Guide prices for sliding doors for new openings in Cheshire
Use these guide prices to budget for the whole job in Cheshire: the door, the steelwork, making good and the engineer's calculations, including VAT. Building Control or warrant fees are charged by the council on top.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £7,495–£8,295 |
| 3.6 m | 3 panels | £9,695–£10,895 |
| 4.0 m | 3 panels | £10,295–£11,595 |
| 4.8 m | 4 panels | £11,495–£12,995 |
Every size is on the sliding doors for new openings page.
Daylight and glass in Cheshire
Sun angles matter for big glazed doors. Around Cheshire, midday sun reaches about 60° in summer and drops to about 13° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Towns we cover in Cheshire
We survey and fit sliding doors for new openings in 18 towns across Cheshire, including the CH1, CH65, CW1, CW10, CW11, CW12 postcode districts.
Approvals in England
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Questions about sliding doors for new openings in Cheshire
How soon can you survey in Cheshire?
Surveys in Cheshire are booked at a time that suits you, and we offer survey dates when we reply to your enquiry. After you approve the written quote, manufacture is typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals.
Do I need building regulations to widen a door opening?
Yes, forming or widening an opening is structural work and needs a Building Regulations application in England, supported by structural calculations. Building Control inspects the work, typically including the steel and its bearings. In Scotland a building warrant is needed. Wales and Northern Ireland follow their own building regulations through local authority or district council building control.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.