- Postcode district
- SW19
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Morden, Tooting, Mitcham
- Building rules
- England
What sliding doors for new openings offer homes in Wimbledon
Before you settle on a door type, it helps to know what sliding doors for new openings do well and what to check before you order.
For homes in Wimbledon that are listed or covered by an Article 4 direction, ask the council about the new opening before paying for structural calculations.
Where a Wimbledon house has a bay, chimney breast or upstairs window directly above the planned opening, the engineer will need to account for it in the steel design.
- Telling the engineer that a sliding door will sit beneath the beam lets them limit its deflection, which matters because a beam that sags can stop panels sliding freely.
- Temporary propping holds up the wall above while the masonry is cut out, keeping floors, ceilings and the roof safely supported throughout the work.
- A structural engineer sizes the steel beam and padstones for the actual loads above, so the opening is designed rather than guessed.
How much sun will a door in Wimbledon get?
The midday sun over Wimbledon ranges from about 15° at the winter solstice to about 62° at midsummer. Low-angle winter light reaches further into a room through a tall door, which is one reason taller panels are worth considering; on south or west walls, pair them with solar-control glass.
Guide prices for sliding doors for new openings in Wimbledon
Guide prices cover the door and forming the opening — steel beam, padstones, making good and structural calculations — fitted, including VAT. Building Control fees are set by your council and are extra.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £7,495–£8,295 |
| 2.4 m | 2 panels | £7,895–£8,895 |
| 6.0 m | 4 panels | £13,295–£15,095 |
See every size on the sliding doors for new openings page or try the guide price tool.
How fitting works in Wimbledon
Nothing is ordered until you sign off the surveyed specification. The door is made from the finished opening sizes (typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals), and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door. If you are in Morden or Tooting, the same process and prices apply.
Rules for sliding doors for new openings in England
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Specification choices for sliding doors for new openings in Wimbledon
- Window to door conversion. Cutting down below an existing window to form a door opening to the garden.
- Temporary door or boarding. A secure, weathertight closure while the made-to-measure door is being manufactured.
- Steel beam with padstones. A beam sized by the engineer to carry the wall, floors and roof above.
Questions about sliding doors for new openings in Wimbledon
Is the price different in Wimbledon?
No. Guide prices for sliding doors for new openings are the same across mainland Britain, including Wimbledon. The fitted price depends on size, system, glass and finish, and any structural work, all fixed in your written quote after survey.
Why does beam deflection matter for sliding doors?
Beam deflection matters because a sliding door needs a straight, level head to run properly. Every beam bends slightly under load, and if it bends too much the frame can be squeezed, making panels stiff or causing them to bind. Telling the structural engineer that a large sliding door will go underneath allows them to design a stiffer beam.
How much does it cost to widen an opening for sliding doors?
Our guide price for forming or widening an opening is £3,595 for 2.4 m and £4,495 for 4.8 m, covering steel, padstones, making good and structural calculations. The door is priced separately, and Building Control fees are set by your council. All figures are guide prices inc VAT, fixed in a written quote after we survey the wall and see what is above it.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.