- Postcode district
- TN16
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals
- Guide price
- From £6,595 inc VAT
- Nearby
- Oxted, Sevenoaks, Orpington
- Building rules
- England
Why choose sliding doors for new openings in Westerham?
Most homeowners choosing sliding doors for new openings want the same things: more light, a clear view and a door that is easy to live with.
Turning a Westerham kitchen window into a door to the garden? Check where drains, gullies and air bricks sit outside, because they can affect the new threshold.
Thinking about a wider opening in Westerham but unsure of the size? Mark it out on the wall inside and out with tape, then picture the furniture and the view before you decide.
- Making good the reveals and head after the steel goes in leaves a square, plumb opening, which is what a precision-made sliding door needs to run smoothly.
- Temporary propping holds up the wall above while the masonry is cut out, keeping floors, ceilings and the roof safely supported throughout the work.
- Widening a standard patio opening to a larger span can transform how a room connects to the garden, giving a wall of glass rather than a doorway.
Planning glass for the light in Westerham
Sun angles matter for big glazed doors. Around Westerham, midday sun reaches about 62° in summer and drops to about 15° in winter. That low winter sun is free heat through south-facing glass; high summer sun is easier to shade with a roof overhang, and solar-control glass helps where there is none.
Guide prices for sliding doors for new openings in Westerham
Use these guide prices to budget for the whole job in Westerham: the door, the steelwork, making good and the engineer's calculations, including VAT. Building Control or warrant fees are charged by the council on top.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £7,495–£8,295 |
| 3.0 m | 2 panels | £8,795–£9,895 |
| 3.6 m | 3 panels | £9,695–£10,895 |
See every size on the sliding doors for new openings page or try the guide price tool.
From survey to fitted door in Westerham
A surveyor visits your Westerham home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 4–6 weeks for the door after the opening is measured; building work scheduled around approvals — and fitting usually takes 3–5 days of building work, then 1–2 days to fit the door.
Do you need approval in Westerham?
In England, forming or widening an opening is structural work that needs a Building Regulations application, structural calculations and usually a steel beam on padstones. The new door is also a controlled fitting (U-value 1.4 W/m²K or better if more than 60% glazed). If steelwork bears on a party wall, the Party Wall etc. Act 1996 may apply.
Finishes and extras for sliding doors for new openings
- Low threshold detail. Adjusting floor and outside levels during the building work to allow a lower sill.
- Steel beam with padstones. A beam sized by the engineer to carry the wall, floors and roof above.
- Concealed steel. Setting the beam so it sits above the ceiling line, giving a cleaner head detail inside.
Questions about sliding doors for new openings in Westerham
Do you fit sliding doors for new openings in Westerham?
Yes. We survey and fit sliding doors for new openings in Westerham and across Kent, including nearby Oxted and Sevenoaks. Start with a guide price online or call us, and we will arrange a free survey for a new or replacement door.
Do I need a steel beam for sliding doors?
A widened or new opening usually needs a steel beam or a suitable lintel to carry the wall and anything above it, and for wider openings a steel beam is the usual answer. A structural engineer chooses the size and bearing details based on the loads. The beam is placed on padstones at each end to spread its load into the masonry.
Can you turn a window into a sliding door?
Yes, a window opening can usually be extended down to the floor and often widened to take a sliding door. The work involves removing the masonry below the window, forming a new threshold, and fitting a steel beam or lintel if the opening is widened. Drains, air bricks and floor levels outside need checking, and the work needs a Building Regulations application.
How long does it take to form a new opening?
Forming or widening an opening typically involves 3–5 days of building work, including propping, cutting out, installing the steel and padstones, and making good. The sliding door is then made to the finished opening, which typically takes 4–6 weeks for aluminium, so a secure temporary closure is fitted in between. The door itself typically goes in within one to two days.